Full Name
QIAN XUDONG
(not current staff)
Variants
Qian, X.
Qian, X.D.
Qian, X.-D.
Qian Xudong
Qian, Xudong
Qian X.
Xudong Qian
 
Main Affiliation
 
 
Email
cveqxd@nus.edu.sg
 

Publications

Results 1-20 of 59 (Search time: 0.005 seconds).

Issue DateTitleAuthor(s)
12013A CMOD-based hybrid approach to determine fracture resistance curveYang, W.; Qian, X. 
2Jul-2013A compliance-based approach to measure fracture resistance curve for surface cracked steel platesQian, X. ; Li, Y.
32011A hybrid approach to determine ductile fracture resistanceQian, X. ; Yang, W.
4May-2011A hybrid approach to determine fracture resistance for mode i and mixed-mode i and II fracture specimensQian, X. ; Yang, W.
52013A load-deformation formulation for CHS X- and K-joints in push-over analysesQian, X. ; Zhang, Y.; Choo, Y.S. 
62013A load-deformation formulation with fracture representation based on the J-R curve for tubular jointsQian, X. ; Zhang, Y.; Choo, Y.S. 
72015A load-indentation formulation for cement composite filled pipe-in-pipe structuresQIAN XUDONG ; Wang Yu ; Liew Jat Yuen,Richard ; Zhang, Min-hong 
82015A toughness based deformation limit for fatigue-cracked X-joints under in-plane bendingAhmed A. ; QIAN XUDONG 
92007A uniform approach for the design of 100% CHS overlap jointsQian, X. ; Wardenier, J.; Choo, Y.S. 
102002An Automatic FE Mesh Generator for CHS Tubular JointsQian, X.D. ; Romeijn, A.; Wardenier, J.; Choo, Y.S. 
11Jun-2013An eta-approach to evaluate the elastic-plastic energy release rate for weld-toe cracks in tubular K-jointsZhang, Y.; Qian, X. 
12Dec-2013Brittle failure caused by lamellar splitting in a large-scale tubular joint with fatigue cracksQian, X. ; Ou, Z.; Swaddiwudhipong, S. ; Marshall, P.W. 
13Jun-2011Calibration of Weibull parameters using the conventional mechanism-based strain gradient plasticityQian, X. ; Zhang, S.; Swaddiwudhipong, S. 
14Sep-2008Cleavage fracture modeling of pressure vessels under transient thermo-mechanical loadingQian, X. ; Dodds Jr., R.H.; Yin, S.; Bass, R.
152013CMOD-based J integral measurement for surface cracked specimensQian, X. ; Li, Y.
162011Computing applications in offshore structures at NUSSwaddiwudhipong, S. ; Qian, X. ; Zhang, S.
172011Crack driving force and ultimate strength of thick-walled CHS X-joints with near-toe cracksWang, X.; Wu, J.-F.; Qian, X. 
18Sep-2011Ductile extension of 3-D external circumferential cracks in pipe structuresYang, W.; Qian, X. 
19Mar-2013Ductile tearing assessment of high-strength steel X-joints under in-plane bendingQian, X. ; Li, Y.; Ou, Z. 
20Sep-2010Effect of residual stresses on the linear-elastic KI-T field for circumferential surface flaws in pipesQian, X. ; Li, T.