Full Name
Yui Hung, Christina Lim
Variants
Lim, C.Y.H.
Lim C.Y.H
Lim, C.
 
 
 
Email
mpelimc@nus.edu.sg
 
 

Publications

Results 1-20 of 35 (Search time: 0.005 seconds).

Issue DateTitleAuthor(s)
1May-20102nd International Conference on Advanced Tribology (iCAT2008), 3-5 December 2008, SingaporeSatyanarayana, N. ; Huei Choo, J.; Lim, C. ; Zeng, X.; Sinha, S.K. ; Lim, S.C. 
22020A new method to lightweight and improve strength to weight ratio of magnesium by creating a controlled defectMatli, P.R. ; Krishnan, A.V. ; Manakari, V.; Parande, G. ; Chua, B.W.; Wong, S.C.K.; Lim, C.Y.H. ; Gupta, M. 
32000Crater wear mechanisms of TiN coated high speed steel toolsLim, C.Y.H. ; Lim, S.C. ; Lee, K.S. 
41997Crater wear of TiN coated high speed steel tool insertsLim, S.C. ; Lim, C.Y.H. ; Lee, K.S. 
52004Crystallographic orientation of Ta/TaN bilayer and its effect on seed and bulk Cu 〈111〉 formationHo, C.S.; Liew, S.L.; See, A.; Lim, C.Y.H. 
66-Jun-2006Development of a novel hybrid aluminum-based composite with enhanced propertiesGupta, M. ; Lai, M.O. ; Lim, C.Y.H. 
72015Effect of air-borne particle-particle interaction on materials erosionNguyen V.B ; Nguyen Q.B; Lim C.Y.H ; Zhang Y.W; Khoo B.C 
8Oct-2004Effect of reinforcements on strength of Mg9%Al compositesLu, L. ; Lim, C.Y.H. ; Yeong, W.M.
915-May-2001Effective use of coated tools - The wear-map approachLim, S.C. ; Lim, C.Y.H. 
10Feb-2007Effects of grain size on the wear of recycled AZ91 MgShanthi, M. ; Lim, C.Y.H. ; Lu, L. 
111-Sep-2021Elucidating the specific and combined effects of particle size, impact angle, velocity and stress from an external load on the slurry erosion of mild steel S275JRVenkatraman Krishnan, Anirudh ; Lim, C. Y. H. 
1215-May-2006Enhancing the mechanical properties of pure aluminum using hybrid reinforcement methodologyWong, W.L.E. ; Gupta, M. ; Lim, C.Y.H. 
131-Sep-2005Flux growth of high-homogeneity PMN-PT single crystals and their property characterizationLim, L.C. ; Shanthi, M. ; Rajan, K.K. ; Lim, C.Y.H. 
142013Influence of nano-alumina and sub-micron copper on mechanical properties of magnesium alloy AZ31Nguyen, Q.B. ; Tun, K.S. ; Lim, C.Y.H. ; Wong, W.L.E.; Gupta, M. 
151998Machining conditions and the wear of TiC-coated carbide toolsLim, C.Y.H. ; Lim, S.-C. ; Lee, K.-S. 
161999Machining conditions and the wear of TiC-coated carbide toolsLim, C.Y.H. ; Lim, S.-C. ; Lee, K.-S. 
1727-Jun-2005Overpoling-induced property degradation in Pb (Mg 1/3Nb 2/3)O 3-PbTiO 3 single crystals of near-morphotropic phase boundary compositionsShanthi, M. ; Hoe, K.H.; Lim, C.Y.H. ; Lim, L.C. 
18Jul-1999Performance of TiN-coated high speed steel tool inserts in turningLim, C.Y.H. ; Lim, S.C. ; Lee, K.S. 
192004Quantifying adhesion strength for Cu/Ta barriers/FTEOS dielectric using modified edge lift off testHo, C.S.; Yong, C.; Zhang, B.C.; Lim, C.Y.H. 
202008Quantitative studies of copper diffusion through Ultra-thin ALD tantalum nitride barrier films by high resolution-RBSHo, C.S.; Liew, S.L.; Chan, T.K. ; Malar, P. ; Osipowicz, T. ; Lu, L. ; Lim, C.Y.H.