Please use this identifier to cite or link to this item:
Title: Numerical analysis on compliance and electrical behavior of multi-copper-column flip-chip interconnects for wafer-level packaging
Authors: Liao, E.B.
Tay, A.A.O. 
Ang, S.S. 
Feng, H.H.
Nagarajan, R.
Kripesh, V.
Keywords: Compliance
Electrical parasitic
Multicopper-column interconnect
Wafer-level packaging
Issue Date: May-2006
Citation: Liao, E.B., Tay, A.A.O., Ang, S.S., Feng, H.H., Nagarajan, R., Kripesh, V. (2006-05). Numerical analysis on compliance and electrical behavior of multi-copper-column flip-chip interconnects for wafer-level packaging. IEEE Transactions on Advanced Packaging 29 (2) : 343-353. ScholarBank@NUS Repository.
Abstract: This paper presents modeling and simulation results of a modified copper-column-based flip-chip interconnect with ultrafine pitch for wafer-level packaging, and the process and prototyping procedure are described as well. This interconnect consists of multiple copper columns which are electrically in parallel and supporting a solder bump. A simple analytical model has been developed for correlation between the interconnect geometry and the thermal fatigue life. In comparison to the conventional single-copper-column (SCC) interconnects, numerical analysis reveals that the multi-copper-column (MCC) interconnect features enhanced compliances and, hence, higher thermomechanical reliability, while the associated electrical parasitics (R, L, and C) at dc and moderate frequencies are still kept low. Parametric studies reveal the effects of geometric parameters of MCC interconnects on both compliances and electrical parasitics, which in turn facilitate design optimization for best performance. By using coplanar waveguides (CPWs) as feed lines on both chip and package substrate, a high-frequency (up to 40 GHz) S-parameter analysis is conducted to investigate the transmission characteristics of the MCC interconnects within various scenarios which combines various interconnect pitches and common chip and package substrates. An equivalent lumped circuit model is proposed and the circuit parameters (R, L, C, and G) are obtained throughout a broad frequency range. Good agreement is achieved for the transmission characteristics between the equivalent lumped circuit model and direct simulation results. © 2006 IEEE.
Source Title: IEEE Transactions on Advanced Packaging
ISSN: 15213323
DOI: 10.1016/j.chemosphere.2006.02.010
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.