Please use this identifier to cite or link to this item:
|Title:||Contact mechanics of surfaces with various models of roughness descriptions||Authors:||Tao, Q.
|Keywords:||Finite element method
|Issue Date:||Jul-2001||Citation:||Tao, Q., Lee, H.P., Lim, S.P. (2001-07). Contact mechanics of surfaces with various models of roughness descriptions. Wear 249 (7) : 539-545. ScholarBank@NUS Repository. https://doi.org/10.1016/S0043-1648(01)00536-1||Abstract:||In this paper, the differences among various models of rough surface descriptions on the stress analysis of head-disk interface are examined. Besides the commonly used fractal geometry, simpler polynomials and Fourier series are used for describing the surface height variation. Elastic-plastic contact analyses for the head-disk interface (HDI) are then performed using ABAQUS. By incorporating various rough surface characterizations into the finite element model of the disk medium, the corresponding finite element analyses are carried out to demonstrate the variation and distribution of the contact pressure. Simulation results for Von Mises equivalent stress, equivalent plastic strain, and maximum tensile stress, are examined for various maximum interference distances. © 2001 Elsevier Science B.V. All rights reserved.||Source Title:||Wear||URI:||http://scholarbank.nus.edu.sg/handle/10635/59789||ISSN:||00431648||DOI:||10.1016/S0043-1648(01)00536-1|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on May 20, 2019
WEB OF SCIENCETM
checked on May 13, 2019
checked on May 12, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.