Please use this identifier to cite or link to this item: https://doi.org/10.3390/polym10070753
Title: Electrohydrodynamic Jet 3D Printed Nerve Guide Conduits (NGCs) for peripheral Nerve Injury Repair
Authors: Vijayavenkataraman S.
Zhang S. 
Thaharah S. 
Sriram G. 
Lu W.F. 
Fuh J.Y.H. 
Keywords: 3D printed scaffolds; Electrohydrodynamic jetting; Nerve guide conduits; Peripheral nerve injury; Porous scaffolds; Tissue engineering
Issue Date: 2018
Publisher: MDPI AG
Citation: Vijayavenkataraman S., Zhang S., Thaharah S., Sriram G., Lu W.F., Fuh J.Y.H. (2018). Electrohydrodynamic Jet 3D Printed Nerve Guide Conduits (NGCs) for peripheral Nerve Injury Repair. Polymers 10 (7) : 753. ScholarBank@NUS Repository. https://doi.org/10.3390/polym10070753
Abstract: The prevalence of peripheral nerve injuries resulting in loss of motor function, sensory function, or both, is on the rise. Artificial Nerve Guide Conduits (NGCs) are considered an effective alternative treatment for autologous nerve grafts, which is the current gold-standard for treating peripheral nerve injuries. In this study, Polycaprolactone-based three-dimensional porous NGCs are fabricated using Electrohydrodynamic jet 3D printing (EHD-jetting) for the first time. The main advantage of this technique is that all the scaffold properties, namely fibre diameter, pore size, porosity, and fibre alignment, can be controlled by tuning the process parameters. In addition, EHDjetting has the advantages of customizability, repeatability, and scalability. Scaffolds with five different pore sizes (125 to 550 ?m) and porosities (65 to 88%) are fabricated and the effect of pore size on the mechanical properties is evaluated. In vitro degradation studies are carried out to investigate the degradation profile of the scaffolds and determine the influence of pore size on the degradation rate and mechanical properties at various degradation time points. Scaffolds with a pore size of 125 ± 15 ?m meet the requirements of an optimal NGC structure with a porosity greater than 60%, mechanical properties closer to those of the native peripheral nerves, and an optimal degradation rate matching the nerve regeneration rate post-injury. The in vitro neural differentiation studies also corroborate the same results. Cell proliferation was highest in the scaffolds with a pore size of 125 ± 15 ?m assessed by the PrestoBlue assay. The Reverse Transcription-Polymerase Chain Reaction (RT-PCR) results involving the three most important genes concerning neural differentiation, namely ?3-tubulin, NF-H, and GAP-43, confirm that the scaffolds with a pore size of 125 ± 15 ?m have the highest gene expression of all the other pore sizes and also outperform the electrospun Polycaprolactone (PCL) scaffold. The immunocytochemistry results, expressing the two important nerve proteins ?3-tubulin and NF200, showed directional alignment of the neurite growth along the fibre direction in EHD-jet 3D printed scaffolds. © 2018 by the authors.
Source Title: Polymers
URI: http://scholarbank.nus.edu.sg/handle/10635/152629
ISSN: 20734360
DOI: 10.3390/polym10070753
Appears in Collections:Staff Publications
Elements

Show full item record
Files in This Item:
File Description SizeFormatAccess SettingsVersion 
polym10070753.pdf3.37 MBAdobe PDF

OPEN

NoneView/Download

SCOPUSTM   
Citations

12
checked on Jan 21, 2020

WEB OF SCIENCETM
Citations

4
checked on Jul 17, 2019

Page view(s)

65
checked on Jan 24, 2020

Download(s)

2
checked on Jan 24, 2020

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.