Please use this identifier to cite or link to this item: https://doi.org/10.1109/COMMAD.2008.4802150
DC FieldValue
dc.titleDoping dependence of optical properties of solid-phase crystallized evaporated poly-Si thin films on glass
dc.contributor.authorHe, S.
dc.contributor.authorSproul, A.B.
dc.contributor.authorAberle, A.G.
dc.date.accessioned2014-10-07T04:43:36Z
dc.date.available2014-10-07T04:43:36Z
dc.date.issued2008
dc.identifier.citationHe, S.,Sproul, A.B.,Aberle, A.G. (2008). Doping dependence of optical properties of solid-phase crystallized evaporated poly-Si thin films on glass. Conference on Optoelectronic and Microelectronic Materials and Devices, Proceedings, COMMAD : 293-296. ScholarBank@NUS Repository. <a href="https://doi.org/10.1109/COMMAD.2008.4802150" target="_blank">https://doi.org/10.1109/COMMAD.2008.4802150</a>
dc.identifier.isbn9781424427178
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/83648
dc.description.abstractBoron and phosphorus doped polycrystalline silicon films with moderate and heavy doping of ∼5×1017cm-3 and ∼1x10 19 cm-3 respectively are investigated to observe the impacts of doping on the optical properties, with "intrinsic" evaporated poly-Si films for comparison. The films are prepared by solid-phase crystallization(SPC)of evaporated amorphous silicon films on borosilicate glass. Tauc-Lorentz models with one or two oscillators are applied for the fitting of both reflection and transmission data collected by a spectrophotometer. Ultraviolet(UV)reflectance shows that the crystal quality of the films is improved by phosphorous doping, while boron has a negligible impact on the crystal quality. The refractive indices of "intrinsic" and moderately doped poly-Si films are similar to the values of crystalline silicon(c-Si), while heavy doping causes a decrease of the refractive indices for wavelengths longer than 1000 nm. The doped poly-Si films exhibit greater absorption than c-Si for visible wavelengths. This absorption is attributed to defects in the films. This "defect absorption" is greatest for the "intrinsic" and boron doped films and least for the phosphorus doped films. There is a strong correlation between the crystal quality of the films determined by UV reflectance and the enhanced absorption at visible wavelengths. © 2008 IEEE.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1109/COMMAD.2008.4802150
dc.sourceScopus
dc.subjectAbsorption coefficient
dc.subjectBoron, phosphorous
dc.subjectEvaporated poly-si films
dc.subjectRefractive index
dc.subjectSolid phase crystallization
dc.subjectTauc-lorentz model
dc.subjectThin films
dc.subjectWVASE fitting
dc.typeConference Paper
dc.contributor.departmentELECTRICAL & COMPUTER ENGINEERING
dc.description.doi10.1109/COMMAD.2008.4802150
dc.description.sourcetitleConference on Optoelectronic and Microelectronic Materials and Devices, Proceedings, COMMAD
dc.description.page293-296
dc.identifier.isiutNOT_IN_WOS
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.