Please use this identifier to cite or link to this item:
|Title:||A wideband circularly polarized stacked slotted microstrip patch antenna||Authors:||Nasimuddin, N.
slotted microstrip patch
stacked microstrip antenna
|Issue Date:||2013||Citation:||Nasimuddin, N., Qing, X., Chen, Z.N. (2013). A wideband circularly polarized stacked slotted microstrip patch antenna. IEEE Antennas and Propagation Magazine 55 (6) : 84-99. ScholarBank@NUS Repository. https://doi.org/10.1109/MAP.2013.6781708||Abstract:||A wideband, single-feed, circularly polarized, stacked, square, slotted microstrip patch antenna is proposed for radio-frequency-identification-reader applications. The proposed antenna consists of an upper square asymmetric slotted patch, stacked over a lower square asymmetric slotted radiating patch and a microstrip stub, along with a coaxial feed. The wideband circularly polarized radiation of the antenna is achieved using a microstrip stub in the lower patch and a stacked slotted square patch. The proposed antenna is designed using a combination of low-cost FR4 substrate and foam. The measured 10 dB return-loss bandwidth of the antenna was around 21% (833 MHz to 1033 MHz), and the 3 dB axial-ratio bandwidth of the antenna was around 13.4% (835 MHz to 955 MHz). The gain was around 7.0 dBic over the 3 dB axial-ratio bandwidth. The overall antenna volume was 0.601¿0 × 0.601¿0 × 0.895¿0 (where ¿0 is the free-space wavelength at 900 MHz). © 2013 IEEE.||Source Title:||IEEE Antennas and Propagation Magazine||URI:||http://scholarbank.nus.edu.sg/handle/10635/81923||ISSN:||10459243||DOI:||10.1109/MAP.2013.6781708|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jun 17, 2019
WEB OF SCIENCETM
checked on Jun 10, 2019
checked on May 31, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.