Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.jbiotec.2008.02.011
DC FieldValue
dc.titleDistribution and composition of extracellular polymeric substances in membrane-aerated biofilm
dc.contributor.authorLi, T.
dc.contributor.authorBai, R.
dc.contributor.authorLiu, J.
dc.date.accessioned2014-06-17T10:14:41Z
dc.date.available2014-06-17T10:14:41Z
dc.date.issued2008-05-20
dc.identifier.citationLi, T., Bai, R., Liu, J. (2008-05-20). Distribution and composition of extracellular polymeric substances in membrane-aerated biofilm. Journal of Biotechnology 135 (1) : 52-57. ScholarBank@NUS Repository. https://doi.org/10.1016/j.jbiotec.2008.02.011
dc.identifier.issn01681656
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/67635
dc.description.abstractExtracellular polymeric substances (EPS) are one of the main components of the biofilm and perform important functions in the biofilm system. In this study, two membrane-aerated biofilms (MABs) were developed for the thin and thick biofilms under different surface loading rates (SLRs). Supplies of oxygen and substrates in the MAB were from two opposite directions. This counter diffusion of nutrients resulted in a different growth environment, in contrast to conventional biofilms receiving both oxygen and substrates from the same side. The compositions, distributions and physicochemical properties (solubility and bindability) of EPS in the MABs of different thicknesses under different SLRs were studied. The effect of dissolved oxygen (DO) concentration within the MAB on EPS properties and distribution was investigated. Experimental results showed the different biofilm thicknesses produced substantially different profiles of EPS composition and distribution. Soluble proteins were more dominant than soluble polysaccharides in the inner aerobic layer of the biofilms; in contrast, bound proteins were greater than bound polysaccharides in the outer anoxic or anaerobic layer of the biofilms. The biofilm-EPS matrix consisted mainly of bound EPS. Bound EPS exhibited a hump-shaped profile with the highest content occurring in an intermediate region in the thin MAB and relatively more uniformly in the one half of the biofilm close to the membrane side and then declined towards the biofilm-liquid interface in the thick MAB. The profiles of soluble EPS presented a similar declining trend from the membrane towards the outer region in both thin and thick MABs. The study suggested that not only EPS composition but also EPS distribution and properties (solubility and bindability) played a crucial role in controlling the cohesiveness and maintaining the structural stability and stratification of the MABs. © 2008 Elsevier B.V. All rights reserved.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1016/j.jbiotec.2008.02.011
dc.sourceScopus
dc.subjectComposition
dc.subjectDistribution
dc.subjectExtracellular polymeric substances (EPS)
dc.subjectMembrane-aerated biofilm (MAB)
dc.subjectStratification
dc.subjectSurface loading rate (SLR)
dc.typeArticle
dc.contributor.departmentDIVISION OF ENVIRONMENTAL SCIENCE & ENGG
dc.description.doi10.1016/j.jbiotec.2008.02.011
dc.description.sourcetitleJournal of Biotechnology
dc.description.volume135
dc.description.issue1
dc.description.page52-57
dc.description.codenJBITD
dc.identifier.isiut000256511300007
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.