Direct approach for tip regulation of a single-link flexible manipulator

Abstract

Direct tip position regulation of flexible manipulators is one of the most challenging control tasks. There are mainly three problems to be addressed in order to achieve good performance. The first two control problems arise due to the unstable zeros and complex poles in the system nominal part which is dominated by a transfer function. The third problem is the existence of unstructured uncertainties due to the truncation of high order resonance modes and system nonlinearities. Due to the above difficulties especially the nonminimum-phase nature, tip regulation task of flexible manipulators is usually solved indirectly: direct control of joint angle and suppression of the flexible link vibration. The aim of this study is to investigate the direct approach for tip regulation. Since the tip transfer function contains unstable zeros and the first few dominant flexible modes (complex poles), a reference model of the same order is selected which does not have any finite zeros but all negative real poles. In order to force the system to follow the reference model in the presence of the unstructured uncertainties, a variable structure controller is adopted in which the switching surface is derived from the reference model. When in sliding mode, the system performs as the reference model. Hence there will be no vibration and the tip position regulation can be achieved when the system approaches steady state. To further improve the system responses, an adaptation law with dead zone scheme is combined with the variable structure controller. Simulation results show that link vibrations have been eliminated and the control profile is fairly smooth.