Please use this identifier to cite or link to this item:
|Title:||Cyclic overaging pre-weld heat treatment of Rene 80: Effect of solution treatment and end aging temperatures||Authors:||Lim, L.C.
|Issue Date:||Apr-2002||Citation:||Lim, L.C., Liu, N., Yi, J.-Z., Ma, Q. (2002-04). Cyclic overaging pre-weld heat treatment of Rene 80: Effect of solution treatment and end aging temperatures. Materials Science and Technology 18 (4) : 420-428. ScholarBank@NUS Repository. https://doi.org/10.1179/026708302225002047||Abstract:||The present work investigated the effect of a cyclic overaging pre-weld heat treatment proposed by Lim (US Patent no. 5 509 980, 1996) on the microstructure, tensile ductility, and weldability of Rene 80 nickel based superalloy (approximate composition 60Ni-14Cr-9.5Co-4Mo-5Ti-3Al-0.17C-Zr-B, wt-%), with a focus on the role of solution treatment and end aging temperatures. The results showed that maximum ductility corresponds to a microstructure consisting of very coarse and widely spaced γ′, with fine γ′ not resolvable even at a magnification of × 10 000. This was achieved by cyclic cooling the material from the solution temperature to a temperature in the range 500 - 750°C followed by fast furnace cooling to suppress the precipitation of fine γ′. The solution treatment temperature was found to control the number density of coarse γ′, which, in turn, slightly influenced the optimum end aging temperature. After the optimum cyclic overaging heat treatment with a solution temperature of 1080°C and an end aging temperature of 550°C, the material exhibited a tensile type fracture path with a high registered tensile ductility of ∼30°% in elongation. Fractographic studies revealed that the necked γ ligaments were thicker and taller, with an increased frequency of cleaved coarse γ′ occurring at different levels in the material. Precision welding tests showed that the weldability of the optimally overaged alloy was significantly improved, owing to both the resultant soft and ductile base metal and the reduced heat affected zone size. © 2002 IoM Communications Ltd.||Source Title:||Materials Science and Technology||URI:||http://scholarbank.nus.edu.sg/handle/10635/58055||ISSN:||02670836||DOI:||10.1179/026708302225002047|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.