Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.memsci.2019.117576
DC FieldValue
dc.titleEffect of gradient profile in ceramic membranes on filtration characteristics: Implications for membrane development
dc.contributor.authorNg T.C.A.
dc.contributor.authorLyu Z.
dc.contributor.authorGu Q.
dc.contributor.authorZhang L.
dc.contributor.authorPoh W.J.
dc.contributor.authorZhang Z.
dc.contributor.authorWang J.
dc.contributor.authorNg H.Y.
dc.date.accessioned2020-11-18T03:54:20Z
dc.date.available2020-11-18T03:54:20Z
dc.date.issued2019-10-18
dc.identifier.citationNg T.C.A., Lyu Z., Gu Q., Zhang L., Poh W.J., Zhang Z., Wang J., Ng H.Y. (2019-10-18). Effect of gradient profile in ceramic membranes on filtration characteristics: Implications for membrane development. Journal of Membrane Science 595 : 117576. ScholarBank@NUS Repository. https://doi.org/10.1016/j.memsci.2019.117576
dc.identifier.issn03767388
dc.identifier.urihttps://scholarbank.nus.edu.sg/handle/10635/183629
dc.description.abstractA proper gradient structure in ceramic membranes can reduce the thickness of the top active layer and therefore enhance the filtration performance and enable a good mechanical stability simultaneously. We designed and fabricated different gradient ceramic membranes including 1-, 2-, and 3-layer ceramic membranes using a simplified single sintering process. To the best of our knowledge, the preparation of the ceramic membrane with gradient porous structure within the top layer and the effect of gradient profile on filtration performance have not been investigated to date. The gradient profile in the top layers can be easily controlled by choosing the slurries with different alumina grain sizes. The 3-layer membrane exhibited the highest water flux and the lowest membrane resistance due to the advantages of gradient porous structure. It retarded internal fouling because foulants smaller than the surface pore size in the gradient porous structure could be easily swept through the membrane by permeate flow as demonstrated by particle size retention tests. Fouling mechanisms were largely size dependent and were similar between different membranes. Transitionary stage between pore blocking and cake filtration was observed from bovine serum albumin (BSA) and sodium alginate foulants but not from activated sludge. Rate and severity of membrane fouling decreased with increasing gradient profile in ceramic membranes. The gradient membrane has the lowest total resistance. This study demonstrated a breakthrough in ceramic membrane development, i.e., developing the gradient porous membrane to enhance the filtration performance. © 2019
dc.publisherElsevier B.V.
dc.sourceScopus
dc.subjectCeramic membrane
dc.subjectFiltration characteristics
dc.subjectFouling mechanism
dc.subjectGradient microstructure
dc.subjectHigh permeability
dc.typeArticle
dc.contributor.departmentDEPT OF CIVIL & ENVIRONMENTAL ENGG
dc.contributor.departmentDEPT OF MATERIALS SCIENCE & ENGINEERING
dc.description.doi10.1016/j.memsci.2019.117576
dc.description.sourcetitleJournal of Membrane Science
dc.description.volume595
dc.description.page117576
dc.published.statePublished
dc.grant.idNRF2016NRF-CRP001-023
dc.grant.idR-284-000-165-281
dc.grant.fundingagencyNational Research Foundation Singapore, NRF
Appears in Collections:Elements
Staff Publications

Show simple item record
Files in This Item:
File Description SizeFormatAccess SettingsVersion 
Tze Chiang Albert Ng_Effect of Gradient Profile in Ceramic Membranes.pdf2.15 MBAdobe PDF

OPEN

Pre-printView/Download

SCOPUSTM   
Citations

15
checked on Sep 19, 2021

Page view(s)

93
checked on Sep 23, 2021

Download(s)

2
checked on Sep 23, 2021

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.