Please use this identifier to cite or link to this item:
|Title:||Producing magnesium metallic glass by disintegrated melt deposition|
|Authors:||Shanthi, M. |
|Source:||Shanthi, M.,Gupta, M.,Jarfors, A.E.W.,Tan, M.J. (2010). Producing magnesium metallic glass by disintegrated melt deposition. AIP Conference Proceedings 1315 : 781-786. ScholarBank@NUS Repository. https://doi.org/10.1063/1.3552545|
|Abstract:||Bulk metallic glasses are new class of engineering materials that exhibit high resistance to crystallization in the under cooled liquid state. The development of bulk metallic glasses of thickness 1cm or less has opened new doors for fundamental studies of both liquid state and glass transition previously not feasible in metallic materials. Moreover, bulk metallic glasses exhibit superior hardness, strength, specific strength, and elastic strain limit, along with good corrosion and wear resistance. Thus they are potential candidates in various sports, structural, engineering and medical applications. Among several BMGs investigated, magnesium-based BMGs have attracted considerable attention because of their low density and superior mechanical properties. The major drawback of this magnesium based BMGs is poor ductility. This can be overcome by the addition of ductile particles/reinforcement to the matrix. In this study, a new technique named disintegrated melt deposition technique was used to synthesize magnesium based BMGs. Rods of different sizes are cast using the current method. Mechanical characterization studies revealed that the amorphous rods produced by the current technique showed superior mechanical properties. © 2010 American Institute of Physics.|
|Source Title:||AIP Conference Proceedings|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jan 20, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.