Please use this identifier to cite or link to this item: https://doi.org/10.1016/S0043-1648(01)00617-2
Title: The effects of work material on tool wear
Authors: Lim, C.Y.H. 
Lau, P.P.T.
Lim, S.C. 
Keywords: Carbide tools
TiC coatings
Wear maps
Work material
Issue Date: Oct-2001
Source: Lim, C.Y.H., Lau, P.P.T., Lim, S.C. (2001-10). The effects of work material on tool wear. Wear 250-251 (PART 1) : 344-348. ScholarBank@NUS Repository. https://doi.org/10.1016/S0043-1648(01)00617-2
Abstract: Wear maps showing the wear behaviour of titanium carbide (TiC)-coated cemented carbide tools during dry turning of various types of steel have been presented in earlier studies. The maps have demonstrated that tool wear rates vary with cutting speeds and feed rates used. They have also shown that there is a range of cutting conditions, called the safety zone, within which tool wear rates are the lowest. This paper further examines, using the wear mapping methodology, the effects of different grades of steel workpieces on the wear of TiC-coated carbide tools. Wear maps constructed for the machining of AISI 1045 and 4340 steels show that flank wear is generally more severe when machining the AISI 4340 grade, especially at high cutting speeds and feed rates. Nevertheless, the contour and location of the safety zone on the wear maps for both grades of steels correspond to that revealed in previous work on general steel grades. © 2001 Elsevier Science B.V. All rights reserved.
Source Title: Wear
URI: http://scholarbank.nus.edu.sg/handle/10635/61489
ISSN: 00431648
DOI: 10.1016/S0043-1648(01)00617-2
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

12
checked on Dec 14, 2017

WEB OF SCIENCETM
Citations

12
checked on Nov 17, 2017

Page view(s)

27
checked on Dec 10, 2017

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.