Please use this identifier to cite or link to this item:
|Title:||Development of high strength Sn-Cu solder using copper particles at nanolength scale|
|Source:||Alam, M.E., Nai, S.M.L., Gupta, M. (2009-05-12). Development of high strength Sn-Cu solder using copper particles at nanolength scale. Journal of Alloys and Compounds 476 (1-2) : 199-206. ScholarBank@NUS Repository. https://doi.org/10.1016/j.jallcom.2008.09.061|
|Abstract:||In this study, varying amounts of nanolength scale copper particles were incorporated into tin by microwave sintering assisted powder metallurgy route. Near dense materials exhibiting near equiaxed grains were obtained. Coefficient of thermal expansion reduced marginally due to the presence of Cu particles. Results of tensile testing revealed that with the addition of 0.35 vol.% (∼0.43 wt.%) of Cu in pure Sn, a significant improvement in yield strength (∼233%) and ultimate tensile strength (∼159%) is realized, when compared with that of commercially available Sn-0.7 wt.% Cu solder. Furthermore, Sn-Cu solder materials developed here also exhibited comparable resistivity with that of eutectic Sn-0.7 wt.% Cu commercial solder. The morphology of pores and intermetallic compounds were found to be the dominating factors affecting the strength of the materials synthesized in this study. © 2008 Elsevier B.V. All rights reserved.|
|Source Title:||Journal of Alloys and Compounds|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Dec 7, 2017
WEB OF SCIENCETM
checked on Nov 22, 2017
checked on Dec 18, 2017
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.