Please use this identifier to cite or link to this item: https://doi.org/10.1007/BF02549221
Title: DSC analysis of the effect of processing technique on the dissolution/precipitation reactions in a hypereutectic Al-Si alloy
Authors: Gupta, M. 
Li, Y. 
Wu, Y.
Lavernia, E.J.
Keywords: Al-Si alloy
DSC
Issue Date: Jun-1995
Source: Gupta, M.,Li, Y.,Wu, Y.,Lavernia, E.J. (1995-06). DSC analysis of the effect of processing technique on the dissolution/precipitation reactions in a hypereutectic Al-Si alloy. Journal of Thermal Analysis 44 (6) : 1321-1331. ScholarBank@NUS Repository. https://doi.org/10.1007/BF02549221
Abstract: In the present study, the effect of primary processing route on the dissolution and precipitation reactions in a commercial Al-Si alloy (designated as A390) is investigated using differential scanning calorimetry (DSC). The Al-Si alloy selected for the present investigation was processed using conventional casting and spray atomization and deposition routes. The results of differential scanning calorimetry conducted on the as-processed samples indicated no significant dissolution reaction for the as-cast A390 alloy when compared to the similar results obtained for as-spray atomized and deposited samples. However, the thermal analysis conducted on the solutionized cast and spray deposited samples exhibited no significant difference in the kinetics of precipitation reactions. The results of the differential thermal analyses were finally rationalized in terms of observed microstructural features. © 1995 Akadémiai Kiadó.
Source Title: Journal of Thermal Analysis
URI: http://scholarbank.nus.edu.sg/handle/10635/51701
ISSN: 03684466
DOI: 10.1007/BF02549221
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

2
checked on Dec 4, 2017

Page view(s)

59
checked on Dec 8, 2017

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.