1. ScholarBank@NUS

Seah Kar Heng

rp04169

Collaboration Map View Statistics Email Alert RSS Feed

Profile

Full Name
Seah Kar Heng
(not current staff)
Variants
Seah, K.H.W.
SEAH, WINSTON KAR HENG
Seah, K.H.
Seah, W.K.H.
Seah, K.
 
Main Affiliation
 
Faculty
 
Email
mpeskh@nus.edu.sg
 

Publications

Refined By:
Type:  Article
Date Issued:  [1990 TO 1999]

Results 21-40 of 57 (Search time: 0.005 seconds).

Issue DateTitleAuthor(s)
211995Effects of using hiduminium/corundum particulate composites as substitute materials for blade manipulatorsSeah, K.H.W. ; Kulkarni, R.S.; Sharma, S.C.; Ramachandra, A.
221996Fracture toughness of cast Al-Zn-Mg alloysSeah, K.H.W. ; Sharma, S.C.
23Oct-1995Fracture toughness of sub-zero-chilled cast ironSeah, K.H.W. ; Hemanth, J.; Sharma, S.C.
241997Hardness of aged ZA-27/short glass fibre reinforced compositesSharma, S.C.; Girish, B.M.; Kamath, R.; Satish, B.M.; Seah, K.H.W. 
251996Hardness, wear resistance and fracture toughness of cast hiduminium/corundum particulate compositesSeah, K.H.W. ; Kulkarni, R.S.; Sharma, S.C.; Ramachandra, A.
2619-May-1999In-process tool-failure detection of a coated grooved tool in turningLee, K.S. ; Seah, K.H.W. ; Wong, Y.S. ; Lim, L.K.S.
271997Influence of coolant on cutting tool performanceSeah, K.H.W. ; Li, X. 
28Feb-1993Influence of the substrate material on the effectiveness of coatings in metal cuttingGoh, T.N. ; Rahman, M. ; Seah, K.H.W. ; Lee, C.H. 
2915-Jan-1995Knowledge base for chip management systemZhang, X.D.; Lee, L.C.; Seah, K.H.W. 
30Oct-1995Machinability of alloyed austempered ductile ironSeah, K.H.W. ; Sharma, S.C.
3113-Apr-1993Mapping the wear of some cutting-tool materialsLim, S.C. ; Liu, Y.B. ; Lee, S.H.; Seah, K.H.W. 
321997Mechanical properties and fractography of cast lead-alloy/quartz particulate compositesSharma, S.C.; Seah, K.H.W. ; Girish, B.M.; Kamath, R.; Satish, B.M.
331997Mechanical properties of as-cast and heat-treated lead alloy/zircon particulate compositesSeah, K.H.W. ; Lu, L. ; Sharma, S.C.; Venkatesh, J.; Girish, B.M.
341997Mechanical properties of as-cast and heat-treated ZA-27/graphite particulate compositesSeah, K.H.W. ; Sharma, S.C.; Girish, B.M.
351995Mechanical properties of as-cast and heat-treated ZA-27/silicon carbide particulate compositesSeah, K.H.W. ; Sharma, S.C.; Rao, P.R.; Girish, B.M.
361995Mechanical properties of as-cast and wrought hiduminium/corundum particulate compositesSeah, K.H.W. ; Kulkarni, R.S.; Sharma, S.C.; Ramachandra, A.
371995Mechanical properties of cast lead alloy/silicon carbide particulate compositesSeah, K.H.W. ; Tucci, A.; Sharma, S.C.; Girish, B.M.; Kamath, R.
381995Mechanical properties of cast ZA-27/graphite particulate compositesSeah, K.H.W. ; Sharma, S.C.; Girish, B.M.
391999Modeling of tool wear acceleration in relation to the reinforcement percentage in cutting of metal matrix compositesLi, X. ; Seah, W.K.H. 
401998Parametric Studies of the Mechanical Behaviour of Porous TitaniumSeah, K. ; Thampuran, R. ; Teoh, Sh.