Please use this identifier to cite or link to this item: https://doi.org/10.1016/S0257-8972(99)00474-0
DC FieldValue
dc.titleTungsten-carbon thin films deposited using screen grid technique in an electron cyclotron resonance chemical vapour deposition system
dc.contributor.authorRusli
dc.contributor.authorYoon, S.F.
dc.contributor.authorYang, H.
dc.contributor.authorAhn, J.
dc.contributor.authorHuang, Q.F.
dc.contributor.authorZhang, Q.
dc.contributor.authorGuo, Y.P.
dc.contributor.authorYang, C.Y.
dc.contributor.authorTeo, E.J.
dc.contributor.authorWee, A.T.S.
dc.contributor.authorHuan, A.C.H.
dc.contributor.authorWatt, F.
dc.date.accessioned2014-10-16T09:47:23Z
dc.date.available2014-10-16T09:47:23Z
dc.date.issued2000-01-24
dc.identifier.citationRusli, Yoon, S.F., Yang, H., Ahn, J., Huang, Q.F., Zhang, Q., Guo, Y.P., Yang, C.Y., Teo, E.J., Wee, A.T.S., Huan, A.C.H., Watt, F. (2000-01-24). Tungsten-carbon thin films deposited using screen grid technique in an electron cyclotron resonance chemical vapour deposition system. Surface and Coatings Technology 123 (2-3) : 134-139. ScholarBank@NUS Repository. https://doi.org/10.1016/S0257-8972(99)00474-0
dc.identifier.issn02578972
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/98464
dc.description.abstractA new technique for depositing metal-carbon (Me-C:H) thin films is proposed based on two metal screen grids embedded within an electron cyclotron resonance chemical vapour deposition (ECR-CVD) system. The grids are negatively biased and supported at adjustable distances above the substrate holder in the deposition chamber. With source gases of methane and argon, sputtering of the metal grids by Ar+ results in the incorporation of metal in the growing carbon films. The amount of metal in the films can be very well controlled over a wide range by varying the bias voltage of the grids, the separation of the grids from the substrate holder and the ratio of CH4/Ar. Furthermore, by separately biasing the substrate holder, the properties of the films can be varied resulting in the formation of a great variety of Me-C:H films with very different mechanical and structural properties. Tungsten incorporated carbon films (W-C:H) were deposited using this technique with two tungsten (W) grids biased at -330 V. The fraction of W in the films was controlled by varying the flow ratio of CH4/Ar. The films were characterized using Rutherford backscattering and X-ray photoelectron spectroscopy measurements, and also in terms of their conductivity, optical absorption and hardness. The conductivity was found to increase by six orders of magnitude whereas the optical gap decreased by 1.5 eV with an increasing atomic fraction of W in the films from 2% to 8%. WC bonds were not detected, and the W detected was mainly in the form of WO2 and WO3. (C) 2000 Elsevier Science S.A. All rights reserved.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1016/S0257-8972(99)00474-0
dc.sourceScopus
dc.subjectDiamond-like carbon
dc.subjectECR-CVD
dc.subjectMetal-carbon films
dc.typeArticle
dc.contributor.departmentPHYSICS
dc.description.doi10.1016/S0257-8972(99)00474-0
dc.description.sourcetitleSurface and Coatings Technology
dc.description.volume123
dc.description.issue2-3
dc.description.page134-139
dc.description.codenSCTEE
dc.identifier.isiut000084717100007
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

4
checked on May 23, 2022

WEB OF SCIENCETM
Citations

5
checked on May 16, 2022

Page view(s)

154
checked on May 12, 2022

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.