Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.tsf.2010.02.025
DC FieldValue
dc.titleTribology of ultra high molecular weight polyethylene film on Si substrate with chromium nitride, titanium nitride and diamond like carbon as intermediate layers
dc.contributor.authorMinn, M.
dc.contributor.authorSinha, S.K.
dc.date.accessioned2014-10-07T09:12:30Z
dc.date.available2014-10-07T09:12:30Z
dc.date.issued2010-05-03
dc.identifier.citationMinn, M., Sinha, S.K. (2010-05-03). Tribology of ultra high molecular weight polyethylene film on Si substrate with chromium nitride, titanium nitride and diamond like carbon as intermediate layers. Thin Solid Films 518 (14) : 3830-3836. ScholarBank@NUS Repository. https://doi.org/10.1016/j.tsf.2010.02.025
dc.identifier.issn00406090
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/85812
dc.description.abstractThis paper presents tribological studies on composite films consisting of different intermediate hard layers (chromium nitride (CrN), titanium nitride (TiN) and diamond like carbon (DLC)) on Si substrate followed by soft ultra high molecular weight polyethylene (4-5 μm thick) as the top layer. The tribological properties of the composite films were evaluated on a ball-on-disc tribometer (composite film sliding against a 4 mm diameter Si3N4 ball) at a normal load of 40 mN and a linear speed of 0.052 m/s. The wear durability of the composite films increases with increasing hardness of the intermediate layers. The composite film with harder intermediate layers (TiN with 24 GPa and DLC layers with 57 GPa and 70 GPa of hardness) provides the best tribological performance with more than 300,000 cycles of sliding when the experiments were stopped. The critical loads of scratching correlate with the wear performances of the composite films. Application of only a few nanometer overcoat of perfluoropolyether on the most wear resistant composite films can further increase the wear lives (more than one million cycles) even at a higher normal load of 70 mN. © 2010 Elsevier B.V. All rights reserved.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1016/j.tsf.2010.02.025
dc.sourceScopus
dc.subjectFriction
dc.subjectHardness
dc.subjectPolyethylene
dc.subjectPolymer film
dc.subjectScratching
dc.subjectWear
dc.typeArticle
dc.contributor.departmentMECHANICAL ENGINEERING
dc.description.doi10.1016/j.tsf.2010.02.025
dc.description.sourcetitleThin Solid Films
dc.description.volume518
dc.description.issue14
dc.description.page3830-3836
dc.description.codenTHSFA
dc.identifier.isiut000278064600043
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

9
checked on Feb 18, 2020

WEB OF SCIENCETM
Citations

6
checked on Feb 11, 2020

Page view(s)

46
checked on Feb 16, 2020

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.