Please use this identifier to cite or link to this item:
|Title:||Tensile response of ductile α-titanium at moderately high strain rates||Authors:||Yuan, J.M.
|Keywords:||High strain rate
Pendulum-driven tensile Kolsky bar
|Issue Date:||14-Dec-2001||Citation:||Yuan, J.M., Shim, V.P.W (2001-12-14). Tensile response of ductile α-titanium at moderately high strain rates. International Journal of Solids and Structures 39 (1) : 213-224. ScholarBank@NUS Repository. https://doi.org/10.1016/S0020-7683(01)00214-1||Abstract:||The tensile behavior of Grade 2 α-titanium is characterized for static loading and at moderately high strain rates (200-1000 s-1). An experimental method is proposed to introduce sufficiently long tensile pulses to induce fracture in ductile specimens by incorporating a sacrificial fracture piece of adequately large diameter into a pendulum-driven tensile Kolsky bar. It is established that flow stress increases with strain rate. Necking in α-titanium occurs much earlier at high strain rates compared to static loading and results in significantly smaller necking and fracture strains. An equation describing the influence of strain rate and temperature softening on necking (tensile instability) is derived. The true stress-strain response between necking and fracture is estimated by measuring the final reduction in cross-sectional area. Fracture in specimens was observed using an optical microscope, which revealed typical ductile fracture characteristics. © 2001 Elsevier Science Ltd. All rights reserved.||Source Title:||International Journal of Solids and Structures||URI:||http://scholarbank.nus.edu.sg/handle/10635/84475||ISSN:||00207683||DOI:||10.1016/S0020-7683(01)00214-1|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Nov 23, 2020
WEB OF SCIENCETM
checked on Jul 8, 2019
checked on Nov 29, 2020
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.