Please use this identifier to cite or link to this item:
https://doi.org/10.1109/COMPEL.2008.4634670
DC Field | Value | |
---|---|---|
dc.title | Multi-functional power converter building block to facilitate the connection of micro-grid | |
dc.contributor.author | Yu, X. | |
dc.contributor.author | Khambadkone, A.M. | |
dc.date.accessioned | 2014-10-07T04:47:29Z | |
dc.date.available | 2014-10-07T04:47:29Z | |
dc.date.issued | 2008 | |
dc.identifier.citation | Yu, X.,Khambadkone, A.M. (2008). Multi-functional power converter building block to facilitate the connection of micro-grid. 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008 : -. ScholarBank@NUS Repository. <a href="https://doi.org/10.1109/COMPEL.2008.4634670" target="_blank">https://doi.org/10.1109/COMPEL.2008.4634670</a> | |
dc.identifier.isbn | 9781424425518 | |
dc.identifier.uri | http://scholarbank.nus.edu.sg/handle/10635/83986 | |
dc.description.abstract | This paper presents a structure of modified DC bus interconnected single-phase micro-grid, as well as a topology of power converter building block (PCBB) based on the DC bus to perform various functions in a distributed energy network. The main functions of the PCBB are: compensating the current harmonics produced by nonlinear load in the micro-grid, mitigating the voltage sag or swell of the electrical power system (EPS) at the point of common coupling (PCC) and facilitating the islanding and re-closure of micro-grid when a severe fault happens to the EPS. To enable the PCBB to work efficiently and effectively, a synchronous rotating frame (SRF) based 6nth order high band-width controller is applied to control the current harmonics compensation; a cascaded PI controller is used to regulate the voltage sag/swell compensation. A complete set of simulation results will be given to validate the viability and efficacy of the PCBB in interconnecting the modified DC bus interconnected micro-grid. ©2008 IEEE. | |
dc.description.uri | http://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1109/COMPEL.2008.4634670 | |
dc.source | Scopus | |
dc.type | Conference Paper | |
dc.contributor.department | ELECTRICAL & COMPUTER ENGINEERING | |
dc.description.doi | 10.1109/COMPEL.2008.4634670 | |
dc.description.sourcetitle | 11th IEEE Workshop on Control and Modeling for Power Electronics, COMPEL 2008 | |
dc.description.page | - | |
dc.identifier.isiut | NOT_IN_WOS | |
Appears in Collections: | Staff Publications |
Show simple item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.