Please use this identifier to cite or link to this item: https://scholarbank.nus.edu.sg/handle/10635/79877
DC FieldValue
dc.titleComparison of the bond strength of stainless steel orthodontic brackets bonded to crown porcelains.
dc.contributor.authorChay, S.H.
dc.contributor.authorWattanapayungkul, P.
dc.contributor.authorYap, A.U.
dc.contributor.authorLoh, P.L.
dc.contributor.authorChung, S.M.
dc.date.accessioned2014-09-18T09:22:18Z
dc.date.available2014-09-18T09:22:18Z
dc.date.issued2005-05
dc.identifier.citationChay, S.H.,Wattanapayungkul, P.,Yap, A.U.,Loh, P.L.,Chung, S.M. (2005-05). Comparison of the bond strength of stainless steel orthodontic brackets bonded to crown porcelains.. Australian orthodontic journal. 21 (1) : 19-23. ScholarBank@NUS Repository.
dc.identifier.issn05873908
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/79877
dc.description.abstractBACKGROUND: The bond strengths and mode of failure of stainless steel orthodontic brackets bonded to the newer all-ceramic crown systems has not been fully investigated. OBJECTIVES: To compare the shear-peel bond strengths and modes of failure of stainless steel Begg orthodontic brackets bonded to all-ceramic crown systems (Finesse, Empress II) and a conventional feldsphatic crown porcelain (Vita Omega 900). METHODS: Fifteen flat-surface discs of three crown porcelains (Finesse, Vita Omega 900, Empress II) were made and mounted in acrylic moulds. The discs were pumiced, etched with phosphoric acid, primed with silane, and a flat stainless steel Begg bracket bonded to each disc with a chemical cure composite resin (Unite Bond). The discs were stored for one week in water and debonded with a sheer-peel load in an Instron uniaxial testing system with a crosshead speed of 0.5 mm/min. The composite remnants on the ceramic surfaces were classified using the Adhesive Remnant Index (ARI). RESULTS: The bond strength of Finesse (15.03 +/- 1.90 MPa) was significantly greater (p < 0.001) than Vita Omega 900 11.51 +/- 2.35 MPa) and Empress II (11.12 +/- 1.78 MPa). There were no significant differences among the ARI scores. The mode of failure was a mixture of adhesive and cohesive failure. CONCLUSION: The results indicate that the bond strengths of stainless steel orthodontic brackets bonded to Finesse and Empress II porcelains are clinically acceptable.
dc.sourceScopus
dc.typeArticle
dc.contributor.departmentRESTORATIVE DENTISTRY
dc.contributor.departmentPREVENTIVE DENTISTRY
dc.description.sourcetitleAustralian orthodontic journal.
dc.description.volume21
dc.description.issue1
dc.description.page19-23
dc.identifier.isiutNOT_IN_WOS
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.