Please use this identifier to cite or link to this item:
Title: Machinability of sintered and hipped Fe-Mo components
Authors: Li, K.
Mannan, M.A. 
Issue Date: 2003
Citation: Li, K.,Mannan, M.A. (2003). Machinability of sintered and hipped Fe-Mo components. Transactions of the North American Manufacturing Research Institution of SME 31 : 145-152. ScholarBank@NUS Repository.
Abstract: Machine components with metal powder can be fabricated using cold compaction/sintering and cold or hot iso-static pressing. This paper investigates the machinability in turning of sintered and Hipped Fe-Mo materials. The commonly used measures of machinability such as cutting forces, surface roughness, tool wear, chip shape and chip color are studied. A detailed study of the material properties of Sintered and Hipped parts is presented. The porosity of a material has been found to have an adverse effect on tool life. This can be explained as the effect of micro-shocks and the reduced thermal conductivity due to the presence of pores. Lower surface roughness has been observed while turning porous specimens at higher speed, lower depth and reduced feed rate. It has been shown that perfect (desirable) chip control can be achieved in turning of porous materials with various combinations of cutting parameters.
Source Title: Transactions of the North American Manufacturing Research Institution of SME
ISBN: 9781618394781
ISSN: 10473025
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

Page view(s)

checked on Dec 1, 2019

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.