Please use this identifier to cite or link to this item:
|Title:||High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools||Authors:||Arunachalam, R.M.
Material removal rate
Total material removed
|Issue Date:||2002||Citation:||Arunachalam, R.M.,Mannan, M.A. (2002). High speed facing of age hardened Inconel 718 using silicon carbide whisker reinforced ceramic tools. Technical Paper - Society of Manufacturing Engineers. MR (MR02-197) : 1-8. ScholarBank@NUS Repository.||Abstract:||This investigation involves the study of the performance of silicon carbide whisker reinforced alumna tools for high speed facing operation of age hardened Inconel 718. Machining tests were conducted using round inserts at cutting speeds ranging from 150 to 450 m/min, feed rate of 0.10 to 0.20mm/rev and depth of cut ranging from 1.0 to 2.0mm. The different tool failure modes and their mechanisms, effects of cutting conditions on the tool wear, cutting forces, tool life, material removal rate, total material removed and surface finish were studied. A cutting speed of 300m/min was the best among the cutting conditions tested.||Source Title:||Technical Paper - Society of Manufacturing Engineers. MR||URI:||http://scholarbank.nus.edu.sg/handle/10635/73504|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.