Please use this identifier to cite or link to this item:
https://doi.org/10.1109/ICCS.2012.6406105
DC Field | Value | |
---|---|---|
dc.title | Low cost and CD insensitive optical signal to noise ratio monitoring method using beat noise | |
dc.contributor.author | Yu, Y. | |
dc.contributor.author | Yang, J. | |
dc.contributor.author | Yu, C. | |
dc.date.accessioned | 2014-06-19T03:16:48Z | |
dc.date.available | 2014-06-19T03:16:48Z | |
dc.date.issued | 2012 | |
dc.identifier.citation | Yu, Y.,Yang, J.,Yu, C. (2012). Low cost and CD insensitive optical signal to noise ratio monitoring method using beat noise. 2012 IEEE International Conference on Communication Systems, ICCS 2012 : 41-44. ScholarBank@NUS Repository. <a href="https://doi.org/10.1109/ICCS.2012.6406105" target="_blank">https://doi.org/10.1109/ICCS.2012.6406105</a> | |
dc.identifier.isbn | 9781467320542 | |
dc.identifier.uri | http://scholarbank.nus.edu.sg/handle/10635/70834 | |
dc.description.abstract | In this paper, we propose a simple in-band optical signal to noise ratio (OSNR) monitoring method based on the beat noise RF power measurement. This method splits the incoming optical signal into two branches, and one of the branches is processed by an optical band pass filter. Then, the signals in the two branches are detected by balanced receiver and the beat noise can be calculated. The simulation results in VPItransmission 7.6 show that the power ratio between the beat noise and signal RF power could be used for OSNR estimation, which is insensitive to polarization mode dispersion impairment. Moreover, low speed photo detectors are used in this monitoring scheme providing immunity to chromatic dispersion, which also reduces the cost of the monitoring scheme. © 2012 IEEE. | |
dc.description.uri | http://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1109/ICCS.2012.6406105 | |
dc.source | Scopus | |
dc.subject | beat noise | |
dc.subject | chromatic dispersion | |
dc.subject | fiber optics communications | |
dc.subject | optical performance monitoring | |
dc.subject | optical signal to noise ratio | |
dc.subject | polarization mode dispersion | |
dc.type | Conference Paper | |
dc.contributor.department | ELECTRICAL & COMPUTER ENGINEERING | |
dc.description.doi | 10.1109/ICCS.2012.6406105 | |
dc.description.sourcetitle | 2012 IEEE International Conference on Communication Systems, ICCS 2012 | |
dc.description.page | 41-44 | |
dc.identifier.isiut | NOT_IN_WOS | |
Appears in Collections: | Staff Publications |
Show simple item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.