Please use this identifier to cite or link to this item:
|dc.title||The effect of friction on indentation test results|
|dc.identifier.citation||Harsono, E., Swaddiwudhipong, S., Liu, Z.S. (2008-09-01). The effect of friction on indentation test results. Modelling and Simulation in Materials Science and Engineering 16 (6) : -. ScholarBank@NUS Repository. https://doi.org/10.1088/0965-0393/16/6/065001|
|dc.description.abstract||A smooth contact analysis is commonly adopted in simulated indentation. Limited studies have been performed to investigate the possibility of deviation due to this simplification. This study involves the finite element simulation of indentation by conical indenters and the Berkovich family of indenters with three different apex angles of indenter tips of 50°, 60° and 70.3°. Loading curvatures and the ratio of the remaining work done to the total work done of the load-indentation curves resulting from the simulated indentation tests considering friction and smooth contact surfaces were compared and discussed. A wide range of elasto-plastic materials obeying the power law strain hardening model were considered in this study. The results as presented herein demonstrate that the effect of friction on the two essential basic parameters from the load-indentation curves, namely, the loading curvatures and the ratio of the work done, varies depending on both mechanical properties of the target materials and the geometries of the indenter tips adopted in the investigation. © 2008 IOP Publishing Ltd.|
|dc.description.sourcetitle||Modelling and Simulation in Materials Science and Engineering|
|Appears in Collections:||Staff Publications|
Show simple item record
Files in This Item:
There are no files associated with this item.
checked on May 10, 2022
WEB OF SCIENCETM
checked on Sep 27, 2021
checked on May 12, 2022
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.