Please use this identifier to cite or link to this item: https://doi.org/10.1061/(ASCE)0733-947X(2003)129:4(420)
DC FieldValue
dc.titleEffect of aggregate spacing on skid resistance of asphalt pavement
dc.contributor.authorFwa, T.F.
dc.contributor.authorChoo, Y.S.
dc.contributor.authorLiu, Y.
dc.date.accessioned2014-06-17T08:17:11Z
dc.date.available2014-06-17T08:17:11Z
dc.date.issued2003-07
dc.identifier.citationFwa, T.F., Choo, Y.S., Liu, Y. (2003-07). Effect of aggregate spacing on skid resistance of asphalt pavement. Journal of Transportation Engineering 129 (4) : 420-426. ScholarBank@NUS Repository. https://doi.org/10.1061/(ASCE)0733-947X(2003)129:4(420)
dc.identifier.issn0733947X
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/65475
dc.description.abstractIn the design of skid resistant asphalt pavements, it is a common practice in pavement engineering to perform laboratory tests to ensure that the paving aggregate has the required frictional resistance and wheel-polishing resistance, and to specify a minimum surface texture depth of the completed pavement to provide adequate surface drainage for safe travel in wet weather. These controls, however, may not be adequate for all types of pavement construction. For instance, field experience in Singapore indicated that aggregate spacing, or gap width between aggregates, had important effects on the skid resistance of asphalt pavements. This paper describes a laboratory study to examine the effect of aggregate gap width on frictional resistance of laboratory prepared specimens. Aggregate gaps ranging from 2 to 10 mm were studied. The 2 mm gap represents that of a dense graded mix, while 10 mm gaps are found in a typical porous asphalt mixture. The British pendulum tester was adopted for the experimental evaluation of frictional resistance. The laboratory test results confirmed the effect of aggregate spacing as observed in the field. Further experimental tests using laboratory fabricated portland cement specimens indicated that the area of the contact surface, as well as the number of gaps within the test area have significant effect on the measured frictional resistance. There is a need for pavement engineers to examine this effect in the asphalt pavement mix design process to ensure that adequate skid resistance will be achieved in actual construction.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1061/(ASCE)0733-947X(2003)129:4(420)
dc.sourceScopus
dc.subjectAggregates
dc.subjectAsphalt pavements
dc.subjectSkid resistance
dc.subjectSpacing
dc.typeArticle
dc.contributor.departmentCIVIL ENGINEERING
dc.description.doi10.1061/(ASCE)0733-947X(2003)129:4(420)
dc.description.sourcetitleJournal of Transportation Engineering
dc.description.volume129
dc.description.issue4
dc.description.page420-426
dc.identifier.isiut000183657000011
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

52
checked on Nov 24, 2021

WEB OF SCIENCETM
Citations

34
checked on Nov 24, 2021

Page view(s)

136
checked on Nov 18, 2021

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.