Please use this identifier to cite or link to this item:
|Title:||Derivation of the complete stress-strain curves for concrete in compression||Authors:||Mansur, M.A.
|Issue Date:||Dec-1995||Citation:||Mansur, M.A.,Wee, T.H.,Chin, M.S. (1995-12). Derivation of the complete stress-strain curves for concrete in compression. Magazine of Concrete Research 47 (173) : 285-290. ScholarBank@NUS Repository.||Abstract:||A closed-loop servo-controlled hydraulic testing machine can be used to generate experimentally the complete stress-strain curves for concrete in compression. However, the deformation readings obtained from the built-in low-voltage displacement transducers or other transducers placed between the machine platens include not only deformations of the concrete but also those due to machine flexibility and end-restraint of the specimen. In this paper, a correction factor is proposed to account for these effects. This requires the use of a compressometer fixed directly to the test specimen and transducers placed between the machine platens. More realistic stress-strain curves for concrete with cylinder (100 × 200 mm) compressive strengths of up to 130 MPa have thus been obtained for the entire loading range.||Source Title:||Magazine of Concrete Research||URI:||http://scholarbank.nus.edu.sg/handle/10635/65390||ISSN:||00249831|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.