Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.cej.2010.07.048
DC FieldValue
dc.titleElimination of die swell and instability in hollow fiber spinning process of hyperbranched polyethersulfone (HPES) via novel spinneret designs and precise spinning conditions
dc.contributor.authorWidjojo, N.
dc.contributor.authorChung, T.-S.
dc.contributor.authorArifin, D.Y.
dc.contributor.authorWeber, M.
dc.contributor.authorWarzelhan, V.
dc.date.accessioned2014-06-17T07:39:55Z
dc.date.available2014-06-17T07:39:55Z
dc.date.issued2010-09
dc.identifier.citationWidjojo, N., Chung, T.-S., Arifin, D.Y., Weber, M., Warzelhan, V. (2010-09). Elimination of die swell and instability in hollow fiber spinning process of hyperbranched polyethersulfone (HPES) via novel spinneret designs and precise spinning conditions. Chemical Engineering Journal 163 (1-2) : 143-153. ScholarBank@NUS Repository. https://doi.org/10.1016/j.cej.2010.07.048
dc.identifier.issn13858947
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/63820
dc.description.abstractThis study has successfully demonstrated that a proper combination of novel spinneret designs and spinning parameters can effectively counteract the die swell as well as flow instability phenomena, i.e. extrudate distortion, in the hyperbranched polyethersulfone (HPES) hollow fiber spinning. Attempts are also made to unravel the die swell and flow behavior differences between HPES and linear polyethersulfone (LPES) membranes spun using various spinneret designs and spinning conditions. In terms of flow stability, it is revealed that short conical spinnerets with a flow angle of 60° as well as short round flow channel spinneret with a flow angle of 30°, can reduce or eliminate extrudate distortions. Apart from spinneret designs, this study also accentuates the importance of a proper choice of spinning conditions for each specific spinneret to achieve flow stability and reduce die swell, namely: (1) bore fluid composition; (2) dope flow rate; (3) spinning temperature; and (4) take-up speed. Experimental results concluded that a proper combination of spinneret design and these four spinning parameters is the key to stabilize the spinning process. It is found that a high take-up speed spinning and a high non-solvent concentration in the bore fluid can fully eliminate die swell and enhance flow stability in the HPES hollow fiber spinning using short and conical or round spinnerets. © 2010 Elsevier B.V.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1016/j.cej.2010.07.048
dc.sourceScopus
dc.subjectDie swell
dc.subjectFlow stability
dc.subjectHyperbranched polyethersulfone
dc.subjectLinear polyethersulfone
dc.subjectSpinneret designs
dc.subjectSpinning parameters
dc.typeArticle
dc.contributor.departmentCHEMICAL & BIOMOLECULAR ENGINEERING
dc.description.doi10.1016/j.cej.2010.07.048
dc.description.sourcetitleChemical Engineering Journal
dc.description.volume163
dc.description.issue1-2
dc.description.page143-153
dc.description.codenCMEJA
dc.identifier.isiut000282391200019
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

16
checked on Apr 16, 2021

WEB OF SCIENCETM
Citations

16
checked on Apr 16, 2021

Page view(s)

106
checked on Apr 13, 2021

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.