Please use this identifier to cite or link to this item:
|Title:||Design centering using momentum based CoG||Authors:||Tan, H.K.
|Issue Date:||1999||Citation:||Tan, H.K.,Ibrahim, Y. (1999). Design centering using momentum based CoG. Engineering Optimization 32 (1) : 79-100. ScholarBank@NUS Repository.||Abstract:||Design centering, part of the parameter design stage in Taguchi's approach to robust design, is achieved through either approximating the geometric constraints, modelling the yield function or through the use of heuristics methods. Ellipsoidal and simplicial based techniques are usually use in the modelling of design constraints. Heuristics methods such as the center of gravity method attempts to estimate the optimal yield directly. Most of the design centering techniques suffer from slow convergence rate and require large number of samples or simulations. The center of gravity algorithm, despite exhibiting oscillatory behaviour when searching for the high yield region, is found to be effective in reaching the high yield region. In this paper, a new heuristic approach called Momentum based Center of Gravity methodology is presented. Application of this method on a cantilever beam, a high pass filter and low pass filter circuits revealed better performance than that of the generic CoG methodology. It is found that the new algorithm reached the high yield region faster and exhibited less oscillatory movement.||Source Title:||Engineering Optimization||URI:||http://scholarbank.nus.edu.sg/handle/10635/63090||ISSN:||0305215X|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.