Please use this identifier to cite or link to this item:
|Title:||CNC microturning: An application to miniaturization||Authors:||Azizur Rahman, M.
|Issue Date:||May-2005||Citation:||Azizur Rahman, M., Rahman, M., Kumar, A.S., Lim, H.S. (2005-05). CNC microturning: An application to miniaturization. International Journal of Machine Tools and Manufacture 45 (6) : 631-639. ScholarBank@NUS Repository. https://doi.org/10.1016/j.ijmachtools.2004.10.003||Abstract:||Micromachining is the basic technology of microengineering for the production of miniature components. One group of tool based micromachining technology is CNC microturning. It is a conventional material removal process that has been miniaturized. The objective of this study is to asses the machinability of brass, aluminium alloy and stainless steel during external cylindrical longitudinal microturning process for different workpiece-tool combinations. Experiments were carried out by varying the depth of cut, feed rate and spindle speed. One parameter was varied while the other two were kept constant in order to identify the best combination of cutting parameters. Machinability assessment was done by force analysis, chip analysis and tool wear criterion. Microshafts were fabricated with brass, aluminium alloy and stainless steel. Finally, microturning process was successfully applied to fabricate compound shaped micropins of diameter less than 0.5 mm. © 2004 Elsevier Ltd. All rights reserved.||Source Title:||International Journal of Machine Tools and Manufacture||URI:||http://scholarbank.nus.edu.sg/handle/10635/59715||ISSN:||08906955||DOI:||10.1016/j.ijmachtools.2004.10.003|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Sep 19, 2020
WEB OF SCIENCETM
checked on Sep 11, 2020
checked on Sep 14, 2020
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.