Please use this identifier to cite or link to this item: https://doi.org/10.1016/S0013-7944(01)00133-3
DC FieldValue
dc.titleAccounting for constraint effects in fracture mechanics analysis of floating production, storage and off-loading vessels and ships
dc.contributor.authorTronskar, J.P.
dc.contributor.authorMannan, M.A.
dc.contributor.authorLai, M.O.
dc.date.accessioned2014-06-17T06:10:27Z
dc.date.available2014-06-17T06:10:27Z
dc.date.issued2002-06-24
dc.identifier.citationTronskar, J.P., Mannan, M.A., Lai, M.O. (2002-06-24). Accounting for constraint effects in fracture mechanics analysis of floating production, storage and off-loading vessels and ships. Engineering Fracture Mechanics 69 (11) : 1219-1248. ScholarBank@NUS Repository. https://doi.org/10.1016/S0013-7944(01)00133-3
dc.identifier.issn00137944
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/59354
dc.description.abstractResearch has been performed to study the effect of constraint dependent fracture toughness of parent metal and HAZ for steels applied for fabrication of oil gas floating production, storage and off-loading (FPSO) vessels and ships. A test method was employed to study the HAZ crack tip opening displacement (CTOD) fracture toughness at various levels of constraint avoiding excessive scatter usually associated with conventional HAZ CTOD testing, which may obscure effects of constraint. The objective of the research was to determine the material dependent constraint parameters in Ainsworth and O'Dowd's constraint modified fracture assessment approach and to develop a method based on information from the literature pertaining to the structural constraint in plates with semi-elliptical surface cracks. Results due to Wang and Parks and Nakamura and Parks computed using line-spring and FE analyses were used to establish polynomial expressions for the structural constraint in tension and bending applicable to fracture assessment of shallow fatigue cracks initiated at weld toes in floating offshore structures such as FPSOs. The results of the analyses clearly show that fracture assessment of semi-elliptical surface cracks in tension would be overly conservative if constraint effects are not accounted for in the Option 1 or Option 2 fracture assessment curves or in fracture toughness. It was also found from the tests conducted on specially prepared wide-plate test specimens, that the constraint modified Option 1 curve was conservative for fracture assessment of semi-elliptical surface cracks located in the HAZ of a 500 MPa minimum specified yield strength quenched and tempered steel for offshore application. © 2002 Elsevier Science Ltd. All rights reserved.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1016/S0013-7944(01)00133-3
dc.sourceScopus
dc.subjectConstraint effects
dc.subjectFPSO
dc.subjectFracture mechanics analysis
dc.subjectR6 method
dc.typeArticle
dc.contributor.departmentMECHANICAL ENGINEERING
dc.description.doi10.1016/S0013-7944(01)00133-3
dc.description.sourcetitleEngineering Fracture Mechanics
dc.description.volume69
dc.description.issue11
dc.description.page1219-1248
dc.description.codenEFMEA
dc.identifier.isiut000176574300003
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

8
checked on Aug 24, 2019

WEB OF SCIENCETM
Citations

4
checked on Aug 16, 2019

Page view(s)

47
checked on Aug 18, 2019

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.