Please use this identifier to cite or link to this item:
|dc.title||A technique for rapid two-stage dynamic tensile loading of polymers|
|dc.identifier.citation||Shim, V.P.W.,Yuan, J.,Lee, S.-H. (2001). A technique for rapid two-stage dynamic tensile loading of polymers. Experimental Mechanics 41 (1) : 122-127. ScholarBank@NUS Repository.|
|dc.description.abstract||A method for rapid two-stage dynamic-dynamic tensile loading of polymers, based on a tensile Hopkinson bar apparatus, is established. In this technique, the initial incident wave and its reflection are used to load a specimen in quick succession. Consequently, the specimen is stressed, momentarily unloaded, then reloaded until fracture. By adopting appropriate assumptions, a procedure to obtain the associated stress-strain curves for such double-stage loading is formulated. These assumptions are examined experimentally and analytically to substantiate their validity. To verify the proposed approach, a relatively rate-insensitive material, LEXAN 141 polycarbonate, was subjected to two-stage dynamic tension. The stress-strain curves obtained via the procedure established were compared with results from static loading. Favorable correlation between the two indicates that the proposed technique can be applied to the study of load history effects on the dynamic behavior of polymeric materials.|
|dc.contributor.department||DEAN'S OFFICE (ENGINEERING)|
|Appears in Collections:||Staff Publications|
Show simple item record
Files in This Item:
There are no files associated with this item.
checked on Oct 13, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.