Please use this identifier to cite or link to this item:
|Title:||Performance of FRP-strengthened beams subjected to elevated temperatures||Authors:||Tan, K.H.
|Issue Date:||May-2011||Citation:||Tan, K.H., Zhou, Y. (2011-05). Performance of FRP-strengthened beams subjected to elevated temperatures. Journal of Composites for Construction 15 (3) : 304-311. ScholarBank@NUS Repository.||Abstract:||The flexural behavior of fiber-reinforced polymer (FRP)-strengthened beams after exposure to elevated temperatures in an electrical furnace was investigated. Twenty-five specimens making up unstrengthened beams and FRP-strengthened beams were fabricated. Glass and basalt FRP systems were used with and without protective systems, which included a cement mortar overlay and two types of commercially available intumescent coatings. Typical temperature-time histories at the surface of FRP laminates, FRP-concrete interface, internal steel bars, and center of beams were monitored by using two specimens. The other specimens were tested to failure under three-point bending after subjecting them to elevated temperatures. Test results indicated a general decrease in the initial stiffness and ultimate strength of the specimens with an increase in the exposed temperature. The protective systems appeared to preserve the structural integrity of glass FRP systems when the elevated temperature was less than approximately 700C. Basalt FRP-strengthened beams exhibited smaller deterioration in ultimate strength than glass FRP-strengthened beams. © 2011 American Society of Civil Engineers.||Source Title:||Journal of Composites for Construction||URI:||http://scholarbank.nus.edu.sg/handle/10635/59156||ISSN:||10900268|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 26, 2018
WEB OF SCIENCETM
checked on Dec 24, 2018
checked on Sep 8, 2019
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.