Please use this identifier to cite or link to this item:
https://doi.org/10.1016/S0924-0136(96)02431-4
Title: | Performance evaluation of shank-type tooling and modular tooling for lathes | Authors: | Yeo, S.H. Rahman, M. |
Keywords: | Cutting tests Evaluation Tool systems Vibration tests |
Issue Date: | Dec-1996 | Citation: | Yeo, S.H., Rahman, M. (1996-12). Performance evaluation of shank-type tooling and modular tooling for lathes. Journal of Materials Processing Technology 62 (4) : 335-340. ScholarBank@NUS Repository. https://doi.org/10.1016/S0924-0136(96)02431-4 | Abstract: | The objective of this study is to make a comparative evaluation of the block tools with conventional shank-type tools. Performance evaluation of both types of tools has been carried out through cutting and modal analysis tests. Under same cutting conditions used, it has been found that the block tool has a higher natural frequency and a smaller amplitude of vibration than that of the conventional tool during the cutting process. Moreover, the surface finish of workpieces produced using the block tool are found to be more consistent and better than that of the conventional tool. Results of modal analysis test substantiate the findings of cutting tests confirming that both natural frequency and damping are higher for block tools as compared to the shank-type tools. | Source Title: | Journal of Materials Processing Technology | URI: | http://scholarbank.nus.edu.sg/handle/10635/58613 | ISSN: | 09240136 | DOI: | 10.1016/S0924-0136(96)02431-4 |
Appears in Collections: | Staff Publications |
Show full item record
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.