Please use this identifier to cite or link to this item: https://doi.org/10.1007/BF00568291
DC FieldValue
dc.titleHolographic inspection of plates with regions of local thinning as defects
dc.contributor.authorShang, H.M.
dc.contributor.authorTay, T.E.
dc.contributor.authorLwin, M.
dc.date.accessioned2014-06-17T05:13:39Z
dc.date.available2014-06-17T05:13:39Z
dc.date.issued1992-06
dc.identifier.citationShang, H.M.,Tay, T.E.,Lwin, M. (1992-06). Holographic inspection of plates with regions of local thinning as defects. Journal of Nondestructive Evaluation 11 (2) : 79-88. ScholarBank@NUS Repository. <a href="https://doi.org/10.1007/BF00568291" target="_blank">https://doi.org/10.1007/BF00568291</a>
dc.identifier.issn01959298
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/58356
dc.description.abstractThis paper describes the use of double-exposure holography on the detection and assessment of plates containing locally thinned regions as artificial defects. The artificial defect is programmed by thinning locally a plate to various depths with a milling cutter. During testing, the plate, illuminated by an expanded laser beam, is clamped along its periphery and an incremental uniform pressure applied between two exposures on the holographic plate. Local thinning is revealed from anomaly in the reconstructed fringe pattern-the boundary of the anomalous fringes is larger than the boundary of the actual artificial defect, and the amount of thinning is deduced from the number of fringes within the boundary. Artificial defects with eccentric local thinning are more readily revealed from the reconstructed fringe pattern than the artificial centric defects. A simple theoretical model is developed so that when the experimental fringe-counts are compared with the theoretical ones, any discrepancy between them reveals not only the presence of centric and eccentric artificial flaws but also their sizes and depths. © 1992 Plenum Publishing Corporation.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1007/BF00568291
dc.sourceScopus
dc.subjectclamping boundary conditions
dc.subjectHolographic inspection
dc.subjectlocal thinning
dc.typeArticle
dc.contributor.departmentMECHANICAL & PRODUCTION ENGINEERING
dc.description.doi10.1007/BF00568291
dc.description.sourcetitleJournal of Nondestructive Evaluation
dc.description.volume11
dc.description.issue2
dc.description.page79-88
dc.description.codenJNOED
dc.identifier.isiutNOT_IN_WOS
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

2
checked on Jun 24, 2019

Page view(s)

66
checked on May 23, 2019

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.