Please use this identifier to cite or link to this item: https://doi.org/10.1109/ICMA.2010.29
DC FieldValue
dc.titleFabrication of electronics devices with multi-material drop-on-demand dispensing system
dc.contributor.authorSun, J.
dc.contributor.authorNg, J.H.
dc.contributor.authorFuh, J.Y.H.
dc.contributor.authorWong, Y.S.
dc.contributor.authorThian, E.S.
dc.contributor.authorYang, R.
dc.contributor.authorTan, K.K.
dc.date.accessioned2014-04-24T08:35:02Z
dc.date.available2014-04-24T08:35:02Z
dc.date.issued2010
dc.identifier.citationSun, J.,Ng, J.H.,Fuh, J.Y.H.,Wong, Y.S.,Thian, E.S.,Yang, R.,Tan, K.K. (2010). Fabrication of electronics devices with multi-material drop-on-demand dispensing system. Proceedings - 2010 International Conference on Manufacturing Automation, ICMA 2010 : 64-70. ScholarBank@NUS Repository. <a href="https://doi.org/10.1109/ICMA.2010.29" target="_blank">https://doi.org/10.1109/ICMA.2010.29</a>
dc.identifier.isbn9780769542935
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/51161
dc.description.abstractOne of the key engineering applications of drop-on-demand (DoD) micro-dispensing system is to fabricate functional devices. Diverse materials with wider range of properties are needed in this process. To satisfy this requirement, multiple printheads on micro level fabrication are preferred to perform multi-material dispensing task. This paper proposes a micro dispensing system with two printheads (microvalve printhead and piezoelectric printhead), since each type of print head has advantages and limitations over the others in specific fabrication. This proposed system has demonstrated its capability for printing resistor and capacitor. The functionalities of these components are tested such as IV characterization for resistor, and frequency characteristics for printed capacitor, followed by a detailed discussion and in-depth analysis. Our experimental results have approved that micro DoD dispensing is a feasible way to fabricate passive electronic devices. © 2010 IEEE.
dc.description.urihttp://libproxy1.nus.edu.sg/login?url=http://dx.doi.org/10.1109/ICMA.2010.29
dc.sourceScopus
dc.subjectDistribution functions
dc.subjectDrop-on-demand(DoD)
dc.subjectMicro-dispensing
dc.subjectMulti-material dispensing
dc.subjectMultip le nozzle
dc.subjectP iezoelectric printhead
dc.typeConference Paper
dc.contributor.departmentMECHANICAL ENGINEERING
dc.contributor.departmentELECTRICAL & COMPUTER ENGINEERING
dc.contributor.departmentDEAN'S OFFICE (ENGINEERING)
dc.description.doi10.1109/ICMA.2010.29
dc.description.sourcetitleProceedings - 2010 International Conference on Manufacturing Automation, ICMA 2010
dc.description.page64-70
dc.identifier.isiutNOT_IN_WOS
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

3
checked on May 15, 2021

Page view(s)

151
checked on May 5, 2021

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.