Please use this identifier to cite or link to this item:
DC FieldValue
dc.titleActive control of a smart composite with shape memory alloy sheet using a plastic optical fiber sensor
dc.contributor.authorKuang, K.S.C.
dc.contributor.authorQuek, S.T.
dc.contributor.authorCantwell, W.J.
dc.identifier.citationKuang, K.S.C., Quek, S.T., Cantwell, W.J. (2013). Active control of a smart composite with shape memory alloy sheet using a plastic optical fiber sensor. Sensors and Actuators, A: Physical 201 : 182-187. ScholarBank@NUS Repository.
dc.description.abstractThis paper investigates the morphing characteristics of a fiber metal laminate (FML) based on shape memory alloy (SMA) skin and a carbon fiber reinforced epoxy composite. Prior to manufacture, the SMA surface layer was trained by heating them to 500 C in a furnace and quenching rapidly in a water bath. The SMA skin was then bonded to the composite and a thin silicon heater was attached to the SMA skin. During activation, the deflection of the beam was detected via a plastic optical fiber (POF) sensor bonded to the upper surface of the smart FML. The output from the POF sensor was monitored using a photodetector which in turn was connected to a control unit. This closed-loop arrangement enables the operator to introduce the prescribed set-point deflection values of the beam. The desired deflections of the smart FML are achieved by the control unit switching on, and subsequently switching off, the silicon heater using the POF to provide the feedback signal. Tests have shown that this smart FML is capable of accurately achieving prescribed values of beam deflection based on the POF sensors signal. The repeatability of the system has been demonstrated by systematically increasing and then decreasing the prescribed deflection and monitoring the subsequent response. In addition, the structure has been shown to be capable of accommodating unwanted disturbances, such as those associated with external loading regimes. During initial studies, using an on-off control strategy, the beam tended to overshoot the required deflection before stabilizing at the set-point value some tens of seconds later. This effect was reduced through the tuning of a proportional-integrative- derivative (PID) control setting on the control unit. It is believed that the findings outlined in this paper demonstrate the potential benefits offered by smart hybrid structures. © 2013 Elsevier B.V. All rights reserved.
dc.subjectActive control
dc.subjectFiber metal laminates
dc.subjectPlastic optical fiber
dc.subjectShape memory alloy
dc.subjectSmart structures
dc.contributor.departmentCIVIL & ENVIRONMENTAL ENGINEERING
dc.description.sourcetitleSensors and Actuators, A: Physical
Appears in Collections:Staff Publications

Show simple item record
Files in This Item:
There are no files associated with this item.


checked on Sep 16, 2021


checked on Sep 16, 2021

Page view(s)

checked on Sep 16, 2021

Google ScholarTM



Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.