Please use this identifier to cite or link to this item: https://doi.org/10.3390/mi12060704
DC FieldValue
dc.titleA brief review on additive manufacturing of polymeric composites and nanocomposites
dc.contributor.authorMonfared, Vahid
dc.contributor.authorBakhsheshi-Rad, Hamid Reza
dc.contributor.authorRamakrishna, Seeram
dc.contributor.authorRazzaghi, Mahmood
dc.contributor.authorBerto, Filippo
dc.date.accessioned2022-10-11T08:04:38Z
dc.date.available2022-10-11T08:04:38Z
dc.date.issued2021-06-16
dc.identifier.citationMonfared, Vahid, Bakhsheshi-Rad, Hamid Reza, Ramakrishna, Seeram, Razzaghi, Mahmood, Berto, Filippo (2021-06-16). A brief review on additive manufacturing of polymeric composites and nanocomposites. Micromachines 12 (6) : 704. ScholarBank@NUS Repository. https://doi.org/10.3390/mi12060704
dc.identifier.issn2072-666X
dc.identifier.urihttps://scholarbank.nus.edu.sg/handle/10635/232160
dc.description.abstractIn this research article, a mini-review study is performed on the additive manufacturing (AM) of the polymeric matrix composites (PMCs) and nanocomposites. In this regard, some methods for manufacturing and important and applied results are briefly introduced and presented. AM of polymeric matrix composites and nanocomposites has attracted great attention and is emerging as it can make extensively customized parts with appreciably modified and improved mechanical properties compared to the unreinforced polymer materials. However, some matters must be addressed containing reduced bonding of reinforcement and matrix, the slip between reinforcement and matrix, lower creep strength, void configurations, high-speed crack propagation, obstruction because of filler inclusion, enhanced curing time, simulation and modeling, and the cost of manufacturing. In this review, some selected and significant results regarding AM or three-dimensional (3D) printing of polymeric matrix composites and nanocomposites are summarized and discuss. In addition, this article discusses the difficulties in preparing composite feedstock filaments and printing issues with nanocomposites and short and continuous fiber composites. It is discussed how to print various thermoplastic composites ranging from amorphous to crystalline polymers. In addition, the ana-lytical and numerical models used for simulating AM, including the Fused deposition modeling (FDM) printing process and estimating the mechanical properties of printed parts, are explained in detail. Particle, fiber, and nanomaterial-reinforced polymer composites are highlighted for their performance. Finally, key limitations are identified in order to stimulate further 3D printing research in the future. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
dc.publisherMDPI AG
dc.rightsAttribution 4.0 International
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceScopus OA2021
dc.subjectAdditive manufacturing
dc.subjectMechanical properties
dc.subjectPolymeric matrix composite
dc.typeReview
dc.contributor.departmentDEPT OF MECHANICAL ENGINEERING
dc.description.doi10.3390/mi12060704
dc.description.sourcetitleMicromachines
dc.description.volume12
dc.description.issue6
dc.description.page704
Appears in Collections:Staff Publications
Elements

Show simple item record
Files in This Item:
File Description SizeFormatAccess SettingsVersion 
10_3390_mi12060704.pdf4.55 MBAdobe PDF

OPEN

NoneView/Download

SCOPUSTM   
Citations

8
checked on Jan 30, 2023

Page view(s)

23
checked on Feb 2, 2023

Google ScholarTM

Check

Altmetric


This item is licensed under a Creative Commons License Creative Commons