Please use this identifier to cite or link to this item: https://scholarbank.nus.edu.sg/handle/10635/16463
DC FieldValue
dc.titleWater vapour transmission and degradation properties of biaxially stretched PCL films and cell-permeable membranes
dc.contributor.authorMAUNG AUNG SOE HTAY
dc.date.accessioned2010-04-08T11:05:13Z
dc.date.available2010-04-08T11:05:13Z
dc.date.issued2004-04-30
dc.identifier.citationMAUNG AUNG SOE HTAY (2004-04-30). Water vapour transmission and degradation properties of biaxially stretched PCL films and cell-permeable membranes. ScholarBank@NUS Repository.
dc.identifier.urihttp://scholarbank.nus.edu.sg/handle/10635/16463
dc.description.abstractIntroduction of minimal amount of foreign material may invoke lesser unwelcome host response. The design and fabrication of thin films have been the focus of a number of current researchers. So in a continuous effort to improve the properties of existing Microthin (10i??3i?-m) poly (i?Y-caprolactone) (PCL) films, the fabrication of thinner PCL film, Ultrathin (4i??1i?-m), with improved moisture permeability is reported. As an alternative means to improve permeability, the feasibility of perforating existing biaxially stretched Microthin films by Robotic Puncturing was explored. Perforated (Perf1 and Perf2) films with hole diameters 180i??5i?-m and 275i??10 i?-m, respectively, were successfully fabricated.Moisture permeability of both unperforated and perforated films was evaluated and compared by determining water vapour transmission rate (WVTR) across the films. Moisture permeability of Perf1 and Perf2 and Ultrathin films were 50%, 80% and 30%, respectively more than Microthin films. Despite the perforations Perf1 and Perf2 films have only slightly lower tensile strength and elongation at break and than Microthin films. In the same way, Ultrathin films have enhanced mechanical properties, and in addition they are more flexible and pliable than Microthin films. The hydrolytic degradation of PCL is very slow compared to other aliphatic polyesters. Results of degradation of PCL films in vitro in phosphate buffer saline (PBS, pH = 7.4) carried out for 12 months verified this. Slow rate of hydrolysis of PCL was attributed mainly to the high initial molecular weight (Mn = 80,000).Therefore this prompted the accelerated degradation of PCL by base promotion. The effect on degradation rate with three concentrations (1M, 3M and 5M) of NaOH solution was examined, in order to understand the degradation kinetics and to model the rate of hydrolysis process. Hydrolytic degradation in a high basic pH (>13) medium occurred mostly by random chain scission of backbone ester bonds on the film surface followed by loss of material due to surface erosion.Accelerated degradation of films suggested a pseudo first-order hydrolysis process, which consisted of an initial stage involving slow rate of mass loss due to preferential degradation of amorphous regions and a second stage that showed rapid mass loss due to film fragmentation. Results indicated that all three films followed a similar degradation profile. In general the Ultrathin films were the fastest to degrade, followed by the Perf1 films and then Microthin films. Rate of degradation increased with increasing NaOH concentration. The presence of flap-like structures in Perf1 films was assigned as the main reason why the degradation rate was faster than that of Microthin films. Faster degradation of Ultrathin films was attributed to their lower surface area to volume ratio and presence of more inherent defects and microvoids in comparison to Microthin films. SEM images showed that surface erosion led to extensive formation of micropores and surface roughness, which increased the surface area and this in turn enhanced the hydrolysis process. In conclusion, results suggest that the rate of loss of film mass was a function of degradation time, film thickness, total surface area of films and concentration of the basic pH medium used.
dc.language.isoen
dc.subjectpoly (ï ¥-caprolactone), biaxial stretching, water vapour transmission, tissue engineering, perforated film, accelerated degradation, sodium hydroxide
dc.typeThesis
dc.contributor.departmentDIVISION OF BIOENGINEERING
dc.contributor.supervisorTEOH SWEE HIN
dc.contributor.supervisorHUTMACHER, DIETMAR WERNER
dc.description.degreeMaster's
dc.description.degreeconferredMASTER OF ENGINEERING
dc.identifier.isiutNOT_IN_WOS
Appears in Collections:Master's Theses (Open)

Show simple item record
Files in This Item:
File Description SizeFormatAccess SettingsVersion 
Preface_Acknow_Contents_Summary_Fig._tables.pdf130.72 kBAdobe PDF

OPEN

NoneView/Download
Chapter_1_Thesis_Introduction_final.pdf164.92 kBAdobe PDF

OPEN

NoneView/Download
Chapter_2_Thesis_Literature_Review_final.pdf569.26 kBAdobe PDF

OPEN

NoneView/Download
Chapter_3_Thesis_Materials_&_Methods_final.pdf255.58 kBAdobe PDF

OPEN

NoneView/Download
Chapter_4_Phy_Mech_&_WVTR_of_films_final.pdf1.32 MBAdobe PDF

OPEN

NoneView/Download
Chapter_5_In_Vitro_Deg._final_A.pdf1.6 MBAdobe PDF

OPEN

NoneView/Download
Chapter_5_In_Vitro_Deg._final_B.pdf1.69 MBAdobe PDF

OPEN

NoneView/Download
Chapter_5_In_Vitro_Deg._final_C.pdf775.17 kBAdobe PDF

OPEN

NoneView/Download
Chapter_6_Thesis_Conclusion_final.pdf46.47 kBAdobe PDF

OPEN

NoneView/Download
Chapter_7_Thesis_FutureRes._final.pdf27.33 kBAdobe PDF

OPEN

NoneView/Download
Thesis_Appendices_final.pdf276.53 kBAdobe PDF

OPEN

NoneView/Download
Thesis_References_final.pdf68.18 kBAdobe PDF

OPEN

NoneView/Download

Page view(s)

686
checked on May 22, 2019

Download(s)

5,658
checked on May 22, 2019

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.