Please use this identifier to cite or link to this item: https://scholarbank.nus.edu.sg/handle/10635/154218
DC FieldValue
dc.titleDevelopment and characterization of nano-ceramic materials for high strength and novel biological applications
dc.contributor.authorHENGKY
dc.date.accessioned2019-05-17T07:15:07Z
dc.date.available2019-05-17T07:15:07Z
dc.date.issued2003
dc.identifier.citationHENGKY (2003). Development and characterization of nano-ceramic materials for high strength and novel biological applications. ScholarBank@NUS Repository.
dc.identifier.urihttps://scholarbank.nus.edu.sg/handle/10635/154218
dc.description.abstractThis study investigates the radio-frequency (RF) plasma synthesis of ultra-fine bioceramic materials. A relatively new processing technique called suspension plasma spraying was used to synthesize fine (5-20?m) and ultra-fine (10nm-4?m) Hydroxyapatite. The ultra-fine powders were also consolidated using Spark Plasma Sintering. The initial study concentrated on investigating the influence of various plasma parameters mainly plate power and chamber pressure with a suspension concentration of 7 wt%HA on the characteristics of the as-sprayed powders. The powders were characterized using particle size measurements, X-ray Diffraction (XRD) analysis, and Scanning Electron Microscopy (SEM). During sintering, the dependence of operating conditions of the Spark Plasma Sintering system on the properties of the compacts was also studied. Microstructural analysis revealed that the morphology of ultra-fine powders was a mixture of 0.5-3?m particles and a fine network of nano-sized particles with particle size less than 100 nm. The XRD analysis showed that the powders were predominantly HA with other decomposed phases, mainly ? and ?-tricalcium phosphate (TCP), tetra-calcium phosphate (TTCP) and calcium oxide (CaO). The relative decomposition in the as-sprayed powders was initially determined using the relative 100% peak height of the individual phases to that of HA and the phase. Both plate power and chamber pressure affected the average particle grain size and morphology. The are two processes taking place when the HA suspension feedstock enter and leave the plasma. These are particle dissociation by thermal treatment and particles collisions that could lead to coalescence and larger particle size. Both processes are counteracting each other and will be discussed in this report. However, average particle size was generally inversely proportional to plate power for both medium and ultra-fine powders. The relative decomposition increased steadily with plate power. Spraying at lower chamber pressure and gas flow rates increased the average particle size and decreased the amount of decomposition. The compacts consolidated from the ultra-fine HA powders by the Spark Plasma Sintering technique exhibited Young’s Modulus and hardness of around 103GPa and 550 Hv, respectively, and fracture toughness about two times the values published in the literature for sintered pure HA (~1.2MPam-1/2). )
dc.sourceSMA BATCHLOAD 20190422
dc.subjectHydroxyapatite
dc.subjectbioceramic
dc.subjectSuspension Plasma Spraying
dc.subjectSpark Plasma Sintering
dc.subjectRadio Frequency Plasma
dc.subjectXRD
dc.subjectSEM
dc.subjectTEM
dc.subjectNano particles
dc.subjectTCP
dc.subjectCaO
dc.typeThesis
dc.contributor.departmentSINGAPORE-MIT ALLIANCE
dc.contributor.supervisorKurnia Wira
dc.contributor.supervisorPhilip Cheang
dc.contributor.supervisorChim Wai Kin
dc.description.degreeMaster's
dc.description.degreeconferredMASTER OF SCIENCE IN ADVANCED MATERIALS FOR MICRO- & NANO- SYSTEMS
dc.description.otherCompany Supervisors: 1. Dr. Kurnia Wira, Supervisor, NanoScience Innovation Pte.Ltd. 2. Dr. Philip Cheang, Co-Supervisor, Advanced Materials Research Center, NTU. Dissertation Advisor: 1. Assoc. Prof. Chim Wai Kin, SMA Fellow, Facilitator, NUS
Appears in Collections:Master's Theses (Restricted)

Show simple item record
Files in This Item:
File Description SizeFormatAccess SettingsVersion 
HENGKY_SMAABSTRACT.doc22.5 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAACKNOWLEDGEMENT.doc20.5 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAAppendix 1.doc22 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAChap1Report.doc29 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAChap2LitReview.doc2.1 MBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAChap3ExpProcedure.doc1.22 MBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAChap4ResDiscussion.doc3.03 MBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAChap5ConclusionRecommendations.doc25.5 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMACover.doc25 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMALIST OF FIGURES.doc24 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMALIST OF TABLES.doc20.5 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMAReferences.doc25.5 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMATable of Content.doc31 kBMicrosoft Word

RESTRICTED

NoneLog In
HENGKY_SMATitlePage.doc20 kBMicrosoft Word

RESTRICTED

NoneLog In

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.