Please use this identifier to cite or link to this item:
|dc.title||Structure and magnetic characterization of amorphous and crystalline Nd-Fe-Al alloys|
|dc.identifier.citation||Wang, X.Z.,Li, Y.,Ding, J.,Si, L.,Kong, H.Z. (1999). Structure and magnetic characterization of amorphous and crystalline Nd-Fe-Al alloys. Journal of Alloys and Compounds 290 (1-2) : 209-215. ScholarBank@NUS Repository.|
|dc.description.abstract||Glass formation has been studied in Nd60Fe30Al10 alloy produced by melt-spinning, water quenching and copper mold chill casting. Partially amorphous alloys were obtained by melt-spinning at low wheel speeds of 5 to 15 m/s and by water quenching of a 1-mm diameter rod, while fully amorphous alloys were obtained by melt-spinning at higher wheel speeds of 20 and 30 m/s and chill casting of a 1-mm diameter rod. A high coercivity was observed in the partially amorphous ribbon melt-spun at 5 m/s and water quenched rod, and in the fully amorphous chill cast rod, while low values of coercivity were obtained in fully amorphous ribbons melt-spun at high speeds of 20 and 30 m/s. Crystallization of water quenched and chill cast samples after heat treatment at high temperature resulted in a substantial reduction of the high coercivity. Results of X-ray diffraction indicate that formation of Nd and a ternary Fe-Nd-Al phase with an unknown crystal structure were present after crystallization. TEM results and a magnetic study of the heat treated samples indicate that as long as there is an amorphous phase produced by low cooling rate, the high coercivity remains. The high coercivity of bulk amorphous samples is discussed. The unknown ternary Fe-Nd-Al phase is antiferromagnetic with a Neel temperature at about 260 K. © 1999 Elsevier Science S.A. All rights reserved.|
|dc.description.sourcetitle||Journal of Alloys and Compounds|
|Appears in Collections:||Staff Publications|
Show simple item record
Files in This Item:
There are no files associated with this item.
checked on Feb 22, 2020
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.