Browsing by Author QIAN XUDONG

Select a letter below to browse by last name or type
0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z


Showing results 1 to 20 of 63  next >
Issue DateTitleAuthor(s)
2013A CMOD-based hybrid approach to determine fracture resistance curveYang, W.; Qian, X. 
Jul-2013A compliance-based approach to measure fracture resistance curve for surface cracked steel platesQian, X. ; Li, Y.
2011A hybrid approach to determine ductile fracture resistanceQian, X. ; Yang, W.
May-2011A hybrid approach to determine fracture resistance for mode i and mixed-mode i and II fracture specimensQian, X. ; Yang, W.
2013A load-deformation formulation for CHS X- and K-joints in push-over analysesQian, X. ; Zhang, Y.; Choo, Y.S. 
2013A load-deformation formulation with fracture representation based on the J-R curve for tubular jointsQian, X. ; Zhang, Y.; Choo, Y.S. 
2015A load-indentation formulation for cement composite filled pipe-in-pipe structuresQIAN XUDONG ; Wang Yu ; Liew Jat Yuen,Richard ; Zhang, Min-hong 
2015A toughness based deformation limit for fatigue-cracked X-joints under in-plane bendingAhmed A. ; QIAN XUDONG 
2007A uniform approach for the design of 100% CHS overlap jointsQian, X. ; Wardenier, J.; Choo, Y.S. 
2002An Automatic FE Mesh Generator for CHS Tubular JointsQian, X.D. ; Romeijn, A.; Wardenier, J.; Choo, Y.S. 
Jun-2013An eta-approach to evaluate the elastic-plastic energy release rate for weld-toe cracks in tubular K-jointsZhang, Y.; Qian, X. 
Dec-2013Brittle failure caused by lamellar splitting in a large-scale tubular joint with fatigue cracksQian, X. ; Ou, Z.; Swaddiwudhipong, S. ; Marshall, P.W. 
Jun-2011Calibration of Weibull parameters using the conventional mechanism-based strain gradient plasticityQian, X. ; Zhang, S.; Swaddiwudhipong, S. 
Sep-2008Cleavage fracture modeling of pressure vessels under transient thermo-mechanical loadingQian, X. ; Dodds Jr., R.H.; Yin, S.; Bass, R.
2013CMOD-based J integral measurement for surface cracked specimensQian, X. ; Li, Y.
2011Computing applications in offshore structures at NUSSwaddiwudhipong, S. ; Qian, X. ; Zhang, S.
2011Crack driving force and ultimate strength of thick-walled CHS X-joints with near-toe cracksWang, X.; Wu, J.-F.; Qian, X. 
Sep-2011Ductile extension of 3-D external circumferential cracks in pipe structuresYang, W.; Qian, X. 
Mar-2013Ductile tearing assessment of high-strength steel X-joints under in-plane bendingQian, X. ; Li, Y.; Ou, Z. 
Sep-2010Effect of residual stresses on the linear-elastic KI-T field for circumferential surface flaws in pipesQian, X. ; Li, T.