Please use this identifier to cite or link to this item:
|Title:||Simultaneous biaxial drawing of poly (E-caprolactone) films|
Simultaneous biaxial drawing
|Citation:||Ng, C.S., Teoh, S.H., Chung, T.S., Hutmacher, D.W. (2000-07). Simultaneous biaxial drawing of poly (E-caprolactone) films. Polymer 41 (15) : 5855-5864. ScholarBank@NUS Repository.|
|Abstract:||The objective in our study was to investigate the biaxial drawing of Poly ((E)-caprolactone) (PCL), a bioerodable polyester that is flexible and elastomeric. PCL films were fabricated using solution casting and melt-pressing methods, and biaxially drawn to draw ratio of 3 X 3. The morphology, mechanical properties and gas permeability changes of the undrawn and drawn films were studied. Results showed that even at the low draw ratio used, a fibrillar morphology developed in the films, interspersed with undrawn material. The tensile strengths of the drawn films were also improved by 50-160%. The solution-cast films have higher gas permeabilities (20-fold), with Knudsen flow character, than melt pressed films. This higher gas permeability was attributed to the presence of microvoids and drawing defects. Permeability was reduced in the melt-pressed films and oxygen was found to permeate three times faster than nitrogen. Biaxial drawing increased the gas permeability slightly but selectivity remained unchanged. (C) 2000 Elsevier Science Ltd. All rights reserved.|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Mar 14, 2018
WEB OF SCIENCETM
checked on May 9, 2018
checked on Jun 8, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.