Please use this identifier to cite or link to this item:
|Title:||Measurement of BOD by initial rate of response of a microbial sensor|
|Authors:||Tan, T.C. |
|Source:||Tan, T.C.,Li, F.,Neoh, K.G. (1993-01). Measurement of BOD by initial rate of response of a microbial sensor. Sensors and Actuators: B. Chemical 10 (2) : 137-142. ScholarBank@NUS Repository.|
|Abstract:||A biochemical oxygen demand (BOD) sensor, prepared from a mixed microbial culture of Bacillus subtilis and Bacillus licheniformis 7B, is calibrated by determining the initial rate of its response in various standard glucose/glutamic acid BOD-check solutions. The initial rate varies linearly with the five-day BOD value up to a maximum of 80 mg/l. The BOD values of a number of wastewater samples from various sources are determined by this method. They compare favourably with the values obtained by the conventional method. With this technique, the time required for each measurement is about 15-30 s with a baseline recovery time of 4 min between measurements. This is considerably faster than the steady-state method, which requires 15-20 min per measurement and a baseline recovery time of 1-4 h. The bio-oxidation activity of the microbial system depends significantly on the types of organic solutes present in the water and can be enhanced by pre-conditioning the microbes in a culture medium doped with the organic solute. © 1993.|
|Source Title:||Sensors and Actuators: B. Chemical|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Mar 10, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.