Please use this identifier to cite or link to this item: https://doi.org/10.1016/j.ces.2007.09.026
Title: Dehydration of alcohols by pervaporation through polyimide Matrimid® asymmetric hollow fibers with various modifications
Authors: Jiang, L.Y. 
Chung, T.-S. 
Rajagopalan, R. 
Keywords: Dehydration
Membrane
Pervaporation
Polymer
Selectivity
Separation
Issue Date: Jan-2008
Citation: Jiang, L.Y., Chung, T.-S., Rajagopalan, R. (2008-01). Dehydration of alcohols by pervaporation through polyimide Matrimid® asymmetric hollow fibers with various modifications. Chemical Engineering Science 63 (1) : 204-216. ScholarBank@NUS Repository. https://doi.org/10.1016/j.ces.2007.09.026
Abstract: Matrimid® polyimide asymmetric hollow fibers have been fabricated and applied for pervaporation dehydration of isopropanol. The effectiveness of thermal annealing at high temperatures and/or chemical crosslinking using 1,3-propane diamine (PDA) on the separation property of these fibers has been investigated. It is found that an increase in the degree of cross-linking results in an increase in separation factor and a decrease in flux. Thermal annealing alone has failed to improve hollow fiber performance due to the cracks caused by inhomogeneous shrinkage in heating process. Nevertheless, appropriate application of thermal annealing as a pretreatment for crosslinking can produce fibers with the optimal performance. The pristine hollow fibers have a flux and a separation factor of 6.2 kg / m2 h and 7.9, respectively; with this thermal treatment followed by crosslinking, the flux and separation factor change to 1.8 kg / m2 h and 132, respectively. It is believed that the formation of charge transfer complexes (CTCs) within the polymer matrix during heat treatment not only assists polymeric chain packing and rigidification but also facilitates more efficient PDA crosslinking, thus results in higher size and shape discrimination in pervaporation. Apparently, PDA molecules could also seal the non-selective cracks (defects). These results indicate the combined thermal and chemical modification possibly is an effective method independent of the initial status of the hollow fiber (e.g. defective or defective free) in revitalizing and enhancing the membrane performance. XRD characterization confirms a tighter polymer networking in hollow fibers with the crosslinking modification. Comparison between the dehydration of different alcohols reveals that a better separation performance could be obtained for alcohols having a larger molecular cross-section. © 2007 Elsevier Ltd. All rights reserved.
Source Title: Chemical Engineering Science
URI: http://scholarbank.nus.edu.sg/handle/10635/88734
ISSN: 00092509
DOI: 10.1016/j.ces.2007.09.026
Appears in Collections:Staff Publications

Show full item record
Files in This Item:
There are no files associated with this item.

SCOPUSTM   
Citations

72
checked on May 17, 2018

WEB OF SCIENCETM
Citations

65
checked on May 9, 2018

Page view(s)

53
checked on May 18, 2018

Google ScholarTM

Check

Altmetric


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.