Please use this identifier to cite or link to this item:
|Title:||Design conceits and testing of a prototype micro thermophotovoltaic system|
Micro thermophotovoltaic system
|Source:||Pan, J., Ding, J., Yang, W., Li, D., Xue, H. (2006). Design conceits and testing of a prototype micro thermophotovoltaic system. Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS : 144-148. ScholarBank@NUS Repository. https://doi.org/10.1109/NEMS.2006.334657|
|Abstract:||The design and testing of micro thermophotovoltaic (micro-TPV) system is described in this paper. The system is made of a SiC emitter, a dielectric filter and a GaSb Photovoltaic cell array. The open-circuit voltage and short-circuit current can be measured by a multimeter, and the output power can be calculated. The effect of mass flux and the distance between the PV cell and outer wall of the combustor on the output power is also analyzed. When the flow rate of hydrogen is 4.133 g/hr and the H2/O2 ratio is 1.8, the micro-TPV system is able to deliver an electrical power output of 1.355W in a micro combustor of 0.195 cm3 in volume. The open-circuit electrical voltage and short-circuit current are 1.85 V and 1.032 amp respectively. This work makes it possible for us to replace batteries with micro-TPV systems as the power of micro mechanical devices in near future. © 2006 IEEE.|
|Source Title:||Proceedings of 1st IEEE International Conference on Nano Micro Engineered and Molecular Systems, 1st IEEE-NEMS|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Jan 15, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.