Please use this identifier to cite or link to this item:
|Title:||Water quality assessment of solar-assisted adsorption desalination cycle|
|Citation:||Kim, Y.-D., Thu, K., Masry, M.E., Ng, K.C. (2014-07-01). Water quality assessment of solar-assisted adsorption desalination cycle. Desalination 344 : 144-151. ScholarBank@NUS Repository. https://doi.org/10.1016/j.desal.2014.03.021|
|Abstract:||This study focuses on the water quality assessment (feed, product and brine) of the pilot adsorption desalination (AD) plant. Seawater from the Red Sea is used as feed to the AD plant. Water quality tests are evaluated by complying the Environmental Protection Agency (EPA) standards with major primary and secondary inorganic drinking water pollutants and other commonly tested water quality parameters. Chemical testing of desalinated water at the post desalination stage confirms the high quality of produced fresh water. Test results have shown that the adsorption desalination process is very effective in eliminating all forms of salts, as evidenced by the significant reduction of the TDS levels from approximately 40,000. ppm in feed seawater to less than 10. ppm. Test results exhibit extremely low levels of parameters which are generally abundant in feed seawater. The compositions of seawater and process related parameters such as chloride, sodium, bromide, sulfate, calcium, magnesium, and silicate in desalinated water exhibit values of less than 0.1. ppm. Reported conductivity measurements of desalinated water are comparable to distilled water conductivity levels and ranged between 2 and 6. μS/cm while TOC and TIC levels are also extremely low and its value is less than 0.5. ppm. © 2014 Elsevier B.V.|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Oct 19, 2018
WEB OF SCIENCETM
checked on Oct 3, 2018
checked on Sep 28, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.