Please use this identifier to cite or link to this item:
|Title:||Polymer jet printing of SU-8 micro-dot patterns on Si surface: Optimization of tribological properties|
|Authors:||Tay, N.B. |
|Citation:||Tay, N.B., Minn, M., Sinha, S.K. (2011-05). Polymer jet printing of SU-8 micro-dot patterns on Si surface: Optimization of tribological properties. Tribology Letters 42 (2) : 215-222. ScholarBank@NUS Repository. https://doi.org/10.1007/s11249-011-9765-y|
|Abstract:||Tribological properties of optimized SU-8 patterns (micro-dots with varying pitch) on Si (silicon) were evaluated using a ball-on-disk tribometer. Sliding tests on the patterns were conducted against a 2-mm diameter Si 3N 4 ball at varying normal loads and sliding velocities. It was observed that the pitch of the SU-8 pattern on Si substrate had a significant effect on the initial coefficient of friction and wear durability. Initial coefficient of friction studies have concluded that the SU-8 polymeric micro-dots improved the tribological properties by sharing the normal force and reducing the contact area. For the wear durability test, ultra-thin layer of perfluoropolyether was over-coated onto SU-8 micro-dot specimens, and the optimized pitch specimens have shown wear durability of more than 100,000 cycles at a normal load of 350 mN. © 2011 Springer Science+Business Media, LLC.|
|Source Title:||Tribology Letters|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on May 23, 2018
WEB OF SCIENCETM
checked on May 8, 2018
checked on May 18, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.