Please use this identifier to cite or link to this item:
|Title:||Electrospun BiOI nano/microtectonic plate-like structure synthesis and UV-light assisted photodegradation of ARS dye|
|Source:||Babu, V.J., Bhavatharini, R.S.R., Ramakrishna, S. (2014). Electrospun BiOI nano/microtectonic plate-like structure synthesis and UV-light assisted photodegradation of ARS dye. RSC Advances 4 (37) : 19251-19256. ScholarBank@NUS Repository. https://doi.org/10.1039/c4ra00579a|
|Abstract:||BiOI electrospun nanofibers were prepared by using PAN as a supporting polymer. Subsequent annealing at 500 °C for 5 h, with a ramp rate of about 5 °C min-1 in air, breaks the nanofibers down to tectonic plate-like nano/microstructures. The surface physical and chemical structural changes were then further characterized by FE-SEM, TEM, XRD and XPS. The results reveal that the morphology and crystallite size of BiOI vary strongly depending on the precursor concentration used in the synthesis method. These nanostructures were later employed for photocatalytic degradation of a synthetic textile dye, Alizarin Red S (ARS). The photocatalytic efficiencies were found to be about 93.34% after 100 min of UV-light (340 nm) illumination. Photocatalytic activity (PCA) performance depends on morphology and band alignment. All the compositions follow first order pseudo-kinetics, which was found to be 0.1197 min-1 for a doping concentration of 3%. The enhancement in photodegradation could be possibly by photocatalysis and a photosensitization phenomenon. This has been explained based on the band edge position. © the Partner Organisations 2014.|
|Source Title:||RSC Advances|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 28, 2018
WEB OF SCIENCETM
checked on Mar 5, 2018
checked on Feb 25, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.