Please use this identifier to cite or link to this item:
|Title:||Wideband bandpass filters with high passband selectivity using SAW-like resonators|
|Keywords:||bandpass filters (BPFs)|
|Source:||Lu, X.,Mouthaan, K.,Soon, Y.T. (2013). Wideband bandpass filters with high passband selectivity using SAW-like resonators. Asia-Pacific Microwave Conference Proceedings, APMC : 485-487. ScholarBank@NUS Repository. https://doi.org/10.1109/APMC.2013.6694839|
|Abstract:||A wideband bandpass filter (BPF) using two cascaded sections, each consisting of a SAW-like resonator and one or two transmission lines, is proposed. The lower and higher transitions of the passband are separately defined by the SAW-like resonators. The roll-off at the band edges can be controlled by properly designing the SAW-like resonators to achieve a highly selective passband. As an example, a prototype BPF centered at 0.42 GHz is implemented on PCB, in which the SAW-like resonators are realized by lumped elements. The measured filter has a 3-dB bandwidth of 47% and high passband selectivity is observed. To obtain a wideband rejection, one transmission line in the filter is loaded with an open stub and a low pass filter is added. Experimental results show good high out-of-band rejection up to more than 20 GHz. © 2013 IEEE.|
|Source Title:||Asia-Pacific Microwave Conference Proceedings, APMC|
|Appears in Collections:||Staff Publications|
Show full item record
Files in This Item:
There are no files associated with this item.
checked on Feb 20, 2018
checked on Feb 23, 2018
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.